Choosing the Right AiM MyChron for Your Kart
Choosing a MyChron starts with your kart, engine and the information you need, not simply the newest model name. This buyer's guide helps you choose between the MyChron 6 single-temperature-input configuration (1T) and MyChron 6 2T, match compatible sensors and leads, and decide what is useful for club racing, junior-driver coaching or more detailed race engineering.
Harris Race Radios™ can help you identify the right configuration before you buy. For current products and shopping, browse the AiM MyChron collection. For general setup, operation and troubleshooting, start with the MyChron Knowledge Hub.
Aaron Harris — professional racing driver and race engineer with multiple international race wins including Bathurst and the Barcelona 24 Hour — uses AiM data systems at every level of motorsport. Charlie Harris — national-winning kart racer, Canterbury University engineering student, and kart race engineer — uses MyChron data at NZ and AU kart championships. Rex Harris — professional qualified radio engineer (RSM Approved Radio Engineer ARE127 and Approved Radio Certifier ARC127) with decades of motorsport electronics experience — handles installation and technical support. This is not a call centre. When you contact us, you speak to someone who has analysed MyChron data at a national level event.
Shop AiM MyChron → | MyChron Knowledge Hub →
What is AiM MyChron?
AiM MyChron combines lap timing, satellite position, RPM and compatible temperature channels in a kart-mounted dash. Available measurements depend on the exact model, sensor package and supported expansions. Use verified data alongside engine requirements, track conditions and driver feedback when deciding what to change.
- Satellite-based lap timing for data analysis, not a replacement for an event's official timing transponder
- Engine data: RPM and compatible water-temperature, CHT or EGT sensors, according to model and configuration
- Driver-input channels with supported sensors and expansions; MyChron6 also provides an internal IMU-derived steering-wheel-angle channel
- Lap comparison: compare laps or drivers with suitable reference data and conditions
- Race Studio 3 software for supported data-download and analysis workflows
- Track mapping to examine position alongside recorded channel data
Buying New or Keeping an Existing MyChron?
MyChron6 is the current new-unit range. Standard MyChron5 units are obsolete and Harris Race Radios™ can no longer sell them; parts, sensors, repairs and existing-owner support continue. This does not determine availability of the specialist MyChron5 660, which requires separate confirmation. For a new kart installation, focus on the required temperature inputs and sensor package. If you already own a MyChron5 or 5S, assess your existing equipment before deciding to upgrade.
For the detailed model differences and upgrade checks, read the MyChron 6 vs MyChron 5 comparison. Existing owners can also use the MyChron 5 to MyChron 6 Upgrade & Compatibility Guide.
Which MyChron Configuration Suits Your Kart?
One Temperature Channel — MyChron 6 1T
MyChron6 with one temperature input is an option when your engine and monitoring requirements call for a single temperature measurement. Match that measurement to the engine: water temperature for a water-cooled application, or an appropriate CHT or EGT installation where specified. Check sensor compatibility, engine instructions and class rules rather than fitting a water-temperature sensor to every kart.
Two Temperature Channels — MyChron 6 2T
MyChron6 2T provides two temperature inputs, compared with one on MyChron6. Both models support Wi-Fi and USB data download; Wi-Fi is not an exclusive 2T feature. Select the required sensors and patch leads for the exact engine and measurements. Charlie Harris uses the 2T at regional and national level.
Junior Drivers & Parents
MyChron data can support junior-driver coaching through lap comparison and recorded position and engine channels. Aaron and Charlie Harris use data for coaching at NZ and AU kart championships. Interpret differences alongside track conditions, equipment, data quality and driver feedback.
Official AiM MyChron training videos
These official AiM videos provide broader workflow guidance for compatible MyChron systems. They are not presented as proof that every MyChron generation has identical features. For the complete official library, visit the AiM Academy Training Videos page.
MyChron setup
Downloading a MyChron session
Race Studio 3 device configuration
Why Buy Your MyChron from Harris Race Radios?
- ✅ Official AiM dealer in New Zealand — genuine AiM MyChron products with full manufacturer warranty
- ✅ We race with it — Charlie Harris uses MyChron data at NZ kart championships; Aaron Harris uses AiM systems at international level
- ✅ Correct sensor advice — Rex Harris matches sensors to your engine and class; sensor compatibility varies and getting it wrong is expensive
- ✅ Free Knowledge Hub — setup, sensor, data-analysis and troubleshooting guides for supported MyChron applications
- ✅ Local NZ support — speak to the Harris Race Radios™ team for model-specific help
Contact us for a free MyChron recommendation →
Browse the Range After Choosing Your Requirements
- Shop the current AiM MyChron range
- AiM Sensors — RPM, temperature, TPS, brake pressure
- AiM Accessories — mounts, cables, expansion modules
MyChron Setup & Support Guides
- MyChron 6 Setup Guide
- MyChron 5 Setup Guide, legacy support
- MyChron 5 to MyChron 6 Upgrade & Compatibility Guide
- How to Read MyChron Data
- Kart Setup Using MyChron Data
- MyChron Sensor Installation Guide
- MyChron Troubleshooting & Error Messages
- MyChron Battery Care & Charging Guide
- MyChron Data Logging Rates & Sampling Guide
- MyChron Knowledge Hub — hardware and setup guides
- Race Studio 3 Knowledge Hub — software workflows
Frequently Asked Questions
Is Harris Race Radios the official AiM MyChron dealer in New Zealand?
Yes. Harris Race Radios is the official AiM dealer in New Zealand for genuine AiM MyChron products, with full manufacturer warranty and local support from Aaron, Charlie, and Rex Harris.
What does AiM MyChron measure?
Measurements depend on model and configuration. They include satellite-based lap timing and position, RPM and compatible temperature channels. Optional driver-input channels require supported sensors and expansions; MyChron6 also provides an internal IMU-derived steering-wheel-angle channel.
Do I need sensors with MyChron?
Confirm the contents of the exact kit and match temperature sensors to the engine. Water-temperature measurement applies to water-cooled engines, not every kart engine. CHT, EGT and optional driver-input sensors require the correct compatibility, wiring and configuration. Contact Rex Harris for advice on your engine and class.
MyChron 5 vs MyChron 6 — which should I choose?
MyChron6 is the current new-unit range, with a 16-grey-level graphical display, built-in 25 Hz GNSS and selectable 20 Hz or 50 Hz RPM acquisition. Standard MyChron5 is obsolete and no longer sold by Harris Race Radios™, but parts, sensors and repair support continue. MyChron5 660 availability requires separate confirmation. Full comparison →
Is MyChron useful for beginners?
It can help beginners review lap timing and engine data with suitable guidance. Aaron and Charlie Harris provide practical data-coaching support; improvement depends on the driver, conditions and how reliable data is used.
How hard is MyChron to install?
Installation depends on the engine, dash model, sensor package and any expansions. Do not rely on a universal completion time or an external-GPS fitting step. Rex Harris provides installation advice, and the MyChron 6 Setup Guide covers the model-specific checks.