MyChron 5 to MyChron 6 Upgrade & Compatibility Guide
MyChron 5 to MyChron 6 Upgrade & Compatibility Guide
This guide helps existing MyChron5 and MyChron5S owners assess a MyChron6 upgrade, including sensor compatibility, generation differences, power and continued legacy support. For the new-purchase comparison, see our MyChron model buying comparison. Written by Aaron Harris, professional racing driver and race engineer with international race wins including Bathurst and the Barcelona 24 Hour, and Charlie Harris, national-winning kart racer, University of Canterbury engineering student and kart race engineer, at Harris Race Radios™, the Official AiM dealer in New Zealand, supplying genuine AiM Sport products.
For a new unit: MyChron6 is the current range. MyChron5 is obsolete and Harris Race Radios™ can no longer sell these units, but continues parts, sensor and repair support for existing owners. This statement does not determine availability of the specialist MyChron5 660.
Shop the current AiM MyChron range → | Ask Aaron or Charlie for advice →
Model differences relevant to an upgrade
| Feature | MyChron5 / MyChron5S | MyChron6 |
|---|---|---|
| Display | Check the exact model's display and backlight specification. | Graphical 320 × 136-pixel display with 16 grey levels and configurable RGB backlight, not a colour TFT. |
| Satellite receiver | Original MyChron5: internal 10 Hz GPS. MyChron5S: internal 25 Hz GPS. | Built-in 25 Hz GNSS. An external GPS08 is not a routine requirement. |
| RPM acquisition | Use the exact model manual; original MyChron5 technical specifications list 50 Hz RPM sampling. | Selectable 20 Hz or 50 Hz RPM acquisition. Not 1000 Hz RPM. |
| Data download | Supported Wi-Fi workflow; do not assume ordinary direct USB data download. | Wi-Fi and USB download. |
| Sensors and expansions | Exact sensor, connector, patch lead and expansion compatibility must be checked. | Exact sensor, connector, patch lead and expansion compatibility must be checked. Not every AiM sensor connects directly. |
| Charging | Use the specified charger and battery or external-power procedure for the exact MyChron5/5S model. | USB charging using the documented cable and suitable supply, or supported external power through the rear five-pin connector. Follow AiM's model-specific requirements. |
| Battery runtime | Depends on exact model, battery condition and use. Do not rely on the former generic 8–12-hour estimate. | Depends on conditions and use. Do not rely on the former 12–18-hour estimate as a promise. |
| Harris Race Radios™ support | Parts, sensors, repairs and existing-owner guidance continue. | Current new-unit range with model and sensor-selection advice. |
1. Display
The MyChron6 user manual specifies a 16-grey-level graphical display, with configurable RGB backlighting. A coloured backlight and RGB LEDs do not make the screen a full-colour TFT. Choose a practical mounting position and check visibility and steering clearance rather than assuming an unverified measured sunlight-readability advantage.
2. GPS and GNSS
Original MyChron5 models have internal 10 Hz GPS; MyChron5S models have internal 25 Hz GPS. MyChron6 has built-in 25 Hz GNSS. The difference between 10 and 25 samples per second is a sampling-frequency difference, not proof of 2.5-times greater positioning or lap-timing accuracy. Comparing a 5S with a 6 does not create a 10-to-25 Hz improvement.
Check reception, correct track layout and timing references before interpreting differences between sessions. Do not purchase or install an external GPS05 or GPS08 as a standard requirement for these models.
3. Channel rates and optional expansions
MyChron6 RPM acquisition is 20 Hz or 50 Hz, as specified in its manual. The previous claims of 1000 Hz general logging, 20-times more data and 200–500 Hz RPM recommendations were incorrect and must not guide configuration.
AiM's up-to-1 kHz specification applies to relevant ACC3 expansion inputs, not automatically to every MyChron channel. Optional brake, throttle, steering or other channels require confirmed compatible hardware, wiring, configuration and firmware. See the model-specific sampling guide.
4. Connectivity, power and charging
MyChron6 supports Wi-Fi and USB data download. MyChron5/5S use the supported Wi-Fi workflow. Do not assume one cable, charging procedure or configuration method applies across generations.
Follow the exact model's power and charger instructions. Universal charging-time and runtime comparisons are not provided here. See the battery care and charging guide and the Race Studio 3 Knowledge Hub for software workflows.
5. Choosing whether to upgrade
Choose MyChron6 when buying a new unit from Harris Race Radios™. Select 1T or 2T and the sensor package to suit the engine and measurements required. If you already own a working MyChron5 or 5S, an upgrade is not mandatory simply because the model is obsolete. Review your actual download, display, sensor and support needs first.
For a used dash, confirm its exact model, battery condition, connectors, sensors, included charger and operation before purchase. Harris Race Radios™ can help identify suitable replacement parts and repairs. Do not assume a used-unit price or availability.
Frequently asked questions
Is MyChron6 worth upgrading to?
It is the current new-unit range, but an existing owner's decision depends on their exact MyChron5 or 5S and practical requirements. The former 2.5-times accuracy and 20-times logging claims are not a valid basis for upgrading.
Can I reuse MyChron5 sensors on MyChron6?
Confirm the exact sensor, connector, patch lead and 1T/2T configuration before buying. Do not assume all sensors connect directly across generations.
What is the GPS difference?
Original MyChron5 uses internal 10 Hz GPS; MyChron5S uses internal 25 Hz GPS; MyChron6 has built-in 25 Hz GNSS. Frequency alone does not establish positioning accuracy.
Is MyChron5 still supported by Harris Race Radios™?
Yes. Parts, sensors, repairs and existing-owner advice continue. Standard MyChron5 units are obsolete and can no longer be sold by Harris Race Radios™; MyChron6 is the current new-unit range. Specialist MyChron5 660 availability requires separate confirmation.
Where can I buy the current MyChron range in New Zealand?
Harris Race Radios™ supplies genuine AiM MyChron products with model-specific advice from Aaron, Charlie and Rex Harris. Use the AiM MyChron collection for current product choices.
Related guides
- MyChron 6 Setup Guide
- MyChron 5 Setup Guide, legacy support
- How to Read MyChron Data
- Kart Setup Using MyChron Data
- MyChron Data Logging Rates & Sampling Guide
MyChron model buying comparison →