Stilo Manuals & Downloads — Intercoms, App Guides & Helmets
Stilo Intercom Manuals — DG-20, DG-30 EVO, DG-10, WL-10 & WL Key
Technical support provided by Rex Harris, degree-qualified radio electronics engineer, RSM Approved Radio Engineer ARE127 and Approved Radio Certifier ARC127, and Aaron Harris, Barcelona 24 Hour class winner, Bathurst competitor and professional motorsport race engineer. Harris Race Radios™ supplies motorsport communications equipment to New Zealand and Australian competitors. Rex Harris began motorsport radio work in 1975.
Stilo intercom repairs and setup advice
Harris Race Radios™ provides expert setup advice, fault-finding and repairs for Stilo intercom systems and associated communications wiring, supporting customers in New Zealand and Australia. Tell us the exact intercom and helmet models and the symptoms so we can assess connection, power, microphone, audio and repair options. We use what we sell. We fix what we sell. Contact our team for support.
Download the intercom manuals, app and firmware guides below, with the helmet user manual in its own section. For Stilo model comparisons and compatibility advice, see our Stilo Rally Intercom Buying Guide. For complete-system selection, radio integration and speech-noise processing, use our motorsport communications services and technical knowledge guide and intercom setup guide.
Part of the Harris Race Radios™ Helmet Knowledge Centre
Download the Intercom Manuals
- DG-20 Basic Instruction Manual, English, Revision 3 (PDF, 4 pages)
- DG-20 Firmware Updater Instructions, Revision 0 (PDF, 4 pages)
- DG-30 EVO Quick Instruction Manual, Revision 2 (PDF, 2 pages)
- DG-10 Control Panel and Bluetooth Instructions, English, Revision 1.4 (PDF, 2 pages)
- WL-10 Instruction Manual (PDF)
- WL Key Instruction Manual (PDF)
The DG-10 instructions are retained for owners of existing equipment. The DG-20 succeeds the DG-10; use the instructions for your exact model.
App, Firmware and Configuration Guides
Check the model, software and firmware requirements in each document before following the procedure. These guides are separate from the model-specific operating manuals.
- App Connection Manual, Revision 5 (PDF, 4 pages)
- Firmware Update with App, Revision 1 (PDF, 5 pages)
- Save and Share Your Configurations, Revision 0 (PDF, 5 pages)
Helmet User Manual
Stilo Helmet User Manual, 2024 multilingual edition including English (PDF)
Quick Reference — Current Stilo Intercom Systems
Use the manufacturer's instructions for the exact model, firmware and supplied configuration. The overview below helps identify the relevant functions; it does not replace the model-specific manual.
Stilo DG-20
The current Stilo digital intercom flagship, superseding the DG-10. Programmable via the free DG-20 smartphone app (Android and Apple). Key controls:
- Stage/Road mode: Selects between stage mode (blocks phone and radio) and road mode (enables Bluetooth phone and radio interface)
- Noise cancellation: Set independently for driver and co-driver via dual digital filters — adjustable through the DG-20 app
- Volume: Individual controls for driver and co-driver
- Camera connection: RCA output for on-board camera recording
- Radio interface: Input for team radio (road mode only)
- USB-C port: Firmware updates via laptop
- App: Download the DG-20 app (Android or Apple) for full configuration, saved profiles, and firmware updates
Stilo DG WL-10 Wireless Intercom
- Noise cancellation levels: Press DIG button to select from 0 (low) to 4 (high) for both driver and co-driver independently
- Volume adjustment: Use + or − to adjust; value displayed on WL-10
- Stage/Road mode: Road mode enables Bluetooth phone connectivity; stage mode disables phone and radio
- Wireless range: Up to 10 metres from intercom box
Stilo WL Key
- Helmet pairing: Pair one helmet at a time. With the key switched off, hold its centre button for 8 seconds until the blue and red LEDs flash. Then hold the corresponding helmet button on the intercom for 8 seconds to pair.
- Push-to-talk (radio only): In road mode, hold the key's centre button. A tone confirms the press; radio transmission starts after approximately 1 second and continues until the button is released. The red confirmation LED lights on the intercom.
- Mute function: Press − for 2 seconds to mute; any key to unmute
- Charging and runtime: USB lead included. Stilo currently quotes up to 5 hours of continuous talk time; the linked Revision 1 instructions list 4 hours and approximately 1.5 hours to recharge from low battery. Recharge fully before use and plan charging breaks around your unit's actual runtime.
Need Help with Your Stilo Intercom?
For setup, pairing, audio-quality problems or repair assessment, contact our team. Rex Harris's motorsport radio experience dates from 1975, alongside his New Zealand radio-engineering and certification authorisations. Aaron brings practical racing and professional race-engineering experience. We can help narrow down the fault and advise whether testing or repair of the equipment is needed.
- Rex Harris: +64 21 682 912, RSM Approved Radio Engineer ARE127 and Approved Radio Certifier ARC127
- Aaron Harris: +64 27 449 9654, racing driver and professional race engineer
- Contact us online for advice and repair enquiries
Related Guides
- Motorsport Communications Services and Technical Knowledge
- Intercom Setup Guide
- Stilo Rally Intercom Buying Guide — All Models Compared
- Stilo Helmet Communications — Why Setup Matters
- Stilo Communications Expert Support
- Stilo Venti WRC Helmet Guide
- Helmet Knowledge Centre
Shop
- Stilo Intercom Systems
- Stilo Helmet Parts, Electronics & Adapters
- Stilo Venti WRC Rally Helmets
- All Stilo Helmets
Harris Race Radios™ — New Zealand and Australian motorsport communications specialists.