Stilo ST6 Helmet Cheek Pads (Pair) | YA0900 / YA0904

Genuine Stilo ST6 Helmet Cheek Pads (Pair)

Genuine Stilo replacement cheek pads sold as a left-and-right pair for the ST6 helmet range. Select the correct helmet model and thickness above to restore the fit and comfort of worn interior padding.

The live ST6 variants use two part-number families: YA0900 for the standard ST6 shell option and YA0904 for the ST6 FN ABP option. Each part-number family is available in 20mm, 25mm, 30mm, 33mm and 35mm thicknesses.

Choose the correct option

• Standard ST6 shell, YA0900: for ST6 F, ST6 FN, ST6 GT, ST6 GTN and ST6 R, excluding the ABP shell option.
• ST6 FN ABP, YA0904: select the dedicated ST6 FN ABP helmet-model option.

Check the label and shell configuration inside your helmet before ordering. The part number is determined by the helmet model option as well as the thickness.

Thickness and fit guide

Choose the pad thickness that gives you a secure, comfortable fit without excessive pressure. As a general guide, thicker cheek pads create a tighter fit and thinner cheek pads create more room.

• 20mm, more room inside the helmet
• 25mm, moderate padding
• 30mm, firmer fit
• 33mm, extra firm fit
• 35mm, thickest option in this range

Helmet fit depends on head shape, liner condition and the rest of the interior. If you are between sizes or unsure which shell option you have, contact Harris Race Radios before ordering.

Key features

• Genuine Stilo replacement component, supplied as a left-and-right pair
• Five thickness choices, 20mm, 25mm, 30mm, 33mm and 35mm
• Two fitment families, YA0900 for standard ST6 shells and YA0904 for ST6 FN ABP
• Tool-free replacement, clips in and out for straightforward interior refreshes
• Designed to restore original fit and comfort after extended use and padding wear

Compatibility and exclusions

Compatible with the standard-shell Stilo ST6 F, ST6 FN, ST6 GT, ST6 GTN and ST6 R when the standard ST6 option is selected. Compatible with the Stilo ST6 FN ABP when the dedicated ABP option is selected.

Not compatible with: Stilo ST6 WRX Venti, ST6 CMR, ST6 KRT or any ST5 helmet. The CMR and KRT helmets use different interior parts, so see the Stilo ST6 CMR / KRT Cheek Pads instead.

Safety and fitment note

These are replacement interior pads, not a complete helmet and not a certification upgrade. Follow Stilo's fitting instructions, check the current event and scrutineering requirements for your category, and replace damaged or degraded helmet components before competition.

Why buy Stilo accessories from Harris Race Radios?

Harris Race Radios is the most experienced Stilo specialist in NZ and AU, with genuine Stilo stock sourced directly through Stilo's supply chain. NZ stock is held locally for fast dispatch, with shipping available to Australia.

Rex Harris is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for NZ RSM and AU ACMA, with motorsport radio experience since 1975. Aaron Harris is an active racing driver and race engineer, and an MSNZ Licence Examiner.

Related Stilo ST6 products

• Stilo ST6 R / GT Replacement Chin Pad YA0904
• Stilo ST6 Helmet Racing Optics Tear Offs
• Stilo ST6 / ST5 Top Air System Kit
• Stilo SFI ST5 ST6 Helmet Skirt
• View the Stilo ST6 Helmets and Accessories range

Frequently asked questions

Are these cheek pads sold as a pair?
Yes. Each option includes the left and right cheek pads.

What part number do I need?
Choose the standard ST6 shell option for YA0900, or choose the ST6 FN ABP option for YA0904. Then select 20mm, 25mm, 30mm, 33mm or 35mm.

Do these fit the ST6 FN ABP?
Yes. Select the dedicated ST6 FN ABP helmet-model option, which uses YA0904. Do not select the standard-shell option for an ABP helmet.

Which standard ST6 helmets do these fit?
The standard-shell option fits ST6 F, ST6 FN, ST6 GT, ST6 GTN and ST6 R helmets, excluding the ABP shell option.

How do I choose the thickness?
Thicker pads create a tighter fit and thinner pads create more room. Your head shape and existing helmet fit matter, so contact us if you are unsure.

Do these fit ST6 CMR, ST6 KRT, ST6 WRX Venti or ST5 helmets?
No. These pads are not compatible with those helmets. The ST6 CMR and KRT models need their own cheek pads.

Do you ship to Australia?
Yes. We hold NZ stock and ship to Australia. Contact us for current shipping rates and lead times.