Are these the same as HANS posts?

Yes. FIA 8858-2010 FHR posts are commonly referred to as HANS posts or HANS anchors and are used to connect approved head restraint systems to compatible helmets.

Are these suitable as replacement HANS posts?

They are genuine Stilo replacement or upgrade posts for compatible Stilo helmets with the correct factory FHR mounting points. They are sold as a matched pair. Confirm fitment before ordering if you are replacing a post on an older helmet.

What helmets do these FHR posts fit?

These posts are designed for Stilo helmets with FHR post anchor points. They are suitable for the Stilo ST5, ST6, Venti WRC and Venti Trophy models listed above when the correct factory mounting points are present. Contact Aaron Harris on +64 27 449 9654 to confirm compatibility with your specific helmet.

Can I use these with any HANS or FHR device?

Use them only with an approved device and helmet combination that specifies compatible FIA 8858-2010 anchor posts. Check the device and helmet manufacturer requirements, or contact us before ordering.

Do these fit non-Stilo helmets?

These are Stilo helmet fittings, not universal posts. They are intended for compatible Stilo helmets with factory FHR mounting points. Contact us with your helmet model before purchasing.

Are these FIA approved?

These posts are FIA 8858-2010 compliant for use with approved FHR devices. Competition requirements can vary, so always verify the current rules for your category with your club, scrutineer or series.

What colour options are available?

Available in Black, Blue and Red — select your preferred colour at checkout.

Are these sold as a pair?

Yes — each order includes a matched pair of left and right FHR anchor posts.

Do you hold NZ stock?

Yes — Harris Race Radios holds genuine Stilo stock locally in NZ for fast dispatch. We also ship to Australia.

Is installation straightforward?

The M6 nut is pre-installed and the posts thread into the helmet's factory anchor points. Follow the helmet and device manufacturer's fitting instructions. If you need fitting assistance, Aaron Harris can help at NZ and AU motorsport events.

1 5

Stilo FIA 8858-2010 HANS & FHR Anchor Posts (Pair)

Stilo // YA0015.2

$115.00 NZD Exc. GST

$115.00 NZD Exc. GST Sale

Sold out

Colour Black Blue Red

Fast Dispatch and Shipping
Support when you need it
Secure payment and tracked shipping
Trustpilot TrustScore 4.8/5 (222 reviews)

Need Help?

You can contact us via our chat box on our website, phone or email.

Aaron Harris: +64 27 449 9654 & aaron@harriscomms.co.nz

Rex Harris: +64 21 682 912 & rex@raceradios.co.nz

Shipping & Delivery

New Zealand:

Nationwide delivery for just $14 NZD ($19 for helmets).
Delivered by NZ Couriers or Post Haste.
Delivery Time: 1-7 days (avg. of 1.3).
Free Local Pickup is also available from 15 Michael Road, Paraparaumu 5032.

Australia:

Standard shipping costs $36.95 AUD ($49.95 for helmets).
Delivered by Asendia, DHL Express or FedEx.
Delivery Time: 7 - 14 days (avg. of 7.8).
For large items we may need to contact you if the freight is higher than expected.

Secure Payment Methods

We accept Apple & Google Pay, Debit or Credit Cards, and PayPal for easy and secure transactions.

Exclusively for our New Zealand customers, we offer Afterpay and Bank Transfer.

Stilo FIA 8858-2010 HANS & FHR Anchor Posts

Genuine Stilo FHR (Frontal Head Restraint) posts for use with HANS and other FIA 8858-2010 compliant FHR devices. Sold as a matched pair, these threaded helmet anchor posts fit compatible Stilo helmets and include a pre-installed M6 nut for secure fitment. Available in Black, Blue, and Red to colour-match your helmet setup.

Often searched for as HANS posts, HANS anchors, helmet anchor posts, FIA helmet anchors, head restraint posts, FHR anchors or replacement HANS posts, these are genuine Stilo FIA 8858-2010 compliant fittings for racers replacing damaged, worn or missing helmet anchors.

FIA 8858-2010 compliant FHR anchor posts
Genuine Stilo replacement or upgrade posts
Sold as a matched pair, left and right
M6 thread with pre-installed nut included
Direct fit for compatible Stilo helmets with factory FHR mounting points
Available in Black, Blue, and Red
Lightweight construction with minimal weight addition

Why FHR Anchor Posts Matter

FHR anchor posts provide the connection between a compatible helmet and an approved frontal head restraint device. They are a small but critical part of a motorsport safety system, so the posts must match the helmet, the device and the applicable competition requirements.

Whether you compete in rallying, circuit racing, endurance racing or karting, maintaining the correct helmet anchor points helps keep your FHR setup secure and ready for scrutineering. Replace damaged, worn or missing posts before an event, and confirm fitment with us if you are unsure which hardware your helmet requires.

Compatible Helmets

✅ Stilo ST5

✅ Stilo ST6

✅ Stilo Venti WRC

✅ Stilo Venti Trophy

✅ Most Stilo helmets with factory FHR mounting points

☎️ Contact us if unsure

These are not universal helmet fittings. Do not drill or modify a helmet to install them. Confirm that your helmet has the correct factory mounting points and that the posts are compatible with your approved FHR device before installation.

MSNZ & Motorsport Australia Compliance

FHR devices and their anchor posts are mandatory equipment in many MSNZ and Motorsport Australia categories. These posts are FIA 8858-2010 compliant for use with approved FHR devices in NZ and AU circuit racing, rally and karting categories where FHR is mandated. Always verify the current regulations with your club, scrutineer or series before competition.

Harris Race Radios — NZ & AU Stilo Specialists

Harris Race Radios supplies genuine Stilo equipment through Stilo's supply chain. We hold NZ stock for fast local dispatch and ship to Australia.

Rex Harris has been involved in motorsport radio and safety equipment since 1975 and is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for NZ RSM and AU ACMA. Aaron Harris is an active racing driver and race engineer — Barcelona 24 Hour 1st in Class 2013, Bathurst 1000 and 12 Hour competitor, BMW Race Driver Series Champion 2011, and an MSNZ Licence Examiner.

📞 Aaron Harris: +64 27 449 9654 | aaron@harriscomms.co.nz

Related Products

Pair these Stilo helmet anchor posts with the correct HANS or other approved FHR device for your helmet and competition category. They are popular replacement fittings for rally, circuit racing, endurance racing and kart competitors throughout New Zealand and Australia.

Frequently Asked Questions

Are these the same as HANS posts?: Yes. FIA 8858-2010 FHR posts are commonly referred to as HANS posts or HANS anchors and are used to connect approved head restraint systems to compatible helmets.
Are these suitable as replacement HANS posts?: They are genuine Stilo replacement or upgrade posts for compatible Stilo helmets with the correct factory FHR mounting points. They are sold as a matched pair. Confirm fitment before ordering if you are replacing a post on an older helmet.
What helmets do these FHR posts fit?: These posts are designed for Stilo helmets with FHR post anchor points. They are suitable for the Stilo ST5, ST6, Venti WRC and Venti Trophy models listed above when the correct factory mounting points are present. Contact Aaron Harris on +64 27 449 9654 to confirm compatibility with your specific helmet.
Can I use these with any HANS or FHR device?: Use them only with an approved device and helmet combination that specifies compatible FIA 8858-2010 anchor posts. Check the device and helmet manufacturer requirements, or contact us before ordering.
Do these fit non-Stilo helmets?: These are Stilo helmet fittings, not universal posts. They are intended for compatible Stilo helmets with factory FHR mounting points. Contact us with your helmet model before purchasing.
Are these FIA approved?: These posts are FIA 8858-2010 compliant for use with approved FHR devices. Competition requirements can vary, so always verify the current rules for your category with your club, scrutineer or series.
What colour options are available?: Available in Black, Blue and Red — select your preferred colour at checkout.
Are these sold as a pair?: Yes — each order includes a matched pair of left and right FHR anchor posts.
Do you hold NZ stock?: Yes — Harris Race Radios holds genuine Stilo stock locally in NZ for fast dispatch. We also ship to Australia.
Is installation straightforward?: The M6 nut is pre-installed and the posts thread into the helmet's factory anchor points. Follow the helmet and device manufacturer's fitting instructions. If you need fitting assistance, Aaron Harris can help at NZ and AU motorsport events.