Rugged Radios Dual Headset/Helmet Nexus Jack Flush Mount

The Rugged Radios Dual Headset/Helmet Nexus Jack Flush Mount provides a professional, accessible connection point for two headset or helmet cables in race cars, UTVs, off-road vehicles and motorsport installations. Harris Race Radios is the Exclusive Official Authorised Distributor and Dealer for Rugged Radios in Australasia.

Mount it on a dash, centre console or roll cage for tidy cable management and fast driver and passenger plug-in access at the start line. Run the intercom connections behind the dash and secure them into the billet flush mount for a cleaner installation.

Why use a dual Nexus jack flush mount?

A flush-mounted connection keeps two headset or helmet sockets secure, visible and easy to reach instead of leaving cables loose around the intercom or console.

• Faster driver and passenger helmet connection
• Cleaner dashboard, console or roll-cage installation
• Improved cable management
• Less strain on loose cable connections
• Quicker race-day setup

Popular applications

Common applications include Can-Am Maverick X3 and Maverick R, Polaris RZR, Honda Talon, Yamaha YXZ, race UTVs, rally cars, trophy trucks and other off-road motorsport vehicles. Confirm the available mounting space, cable clearance and connector configuration before drilling or fitting.

Compatible cable types

• Offroad cables — blue Nexus jacks
• STX Stereo cables — grey Nexus jacks, with a smaller outside diameter

Related products and installation paths

• Rugged Radios Offroad Jack Intercom Cable — choose the length that suits your installation
• Rugged Radios STX STEREO Straight Cable to Intercom — for compatible grey Nexus STX connections
• 696 Plus Remote Head High Fidelity Bluetooth Intercom — a matching intercom system
• Rugged Radios Dura-Link Waterproofing Plug — helps protect unused Offroad Nexus jack connections
• 2026 Can-Am Maverick X3 Complete Communication Kit — complete vehicle-specific system
• 2026 Can-Am X3 Radio & Remote Head Intercom Mount — vehicle-specific mounting solution

For broader installation paths, browse Intercom Accessories & Parts, Radio & Intercom Mounts, Rugged Intercom Parts and Accessories and Rugged Radio Mounts.

Also available

• Single Nexus Jack Flush Mount — for one headset or helmet connection
• Nexus Jack Mount for Bar Mount — bar-mount version

What's included

• Billet dual Nexus jack flush mount
• 2 x set screws — Allen 1/16 inch
• 4 x flush-mount screws — Allen 3/32 inch

Required tools not included

• 1/16 inch Allen wrench
• 3/32 inch Allen wrench
• 1/4 inch wrench

Cables are not included. Choose the cable type that matches your intercom and headset or helmet connection.

Why Harris Race Radios for Rugged Radios?

Harris Race Radios is the Exclusive Official Authorised Distributor and Dealer for Rugged Radios in Australasia. We supply genuine, warranty-backed Rugged Radios products with shipping across New Zealand and Australia.

Our team brings real motorsport expertise across both NZ and AU. Rex Harris is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for NZ RSM and AU ACMA, with motorsport experience dating back to 1975 at the Marlboro Series Grand Prix. Aaron Harris is an active racing driver and race engineer, with experience across Barcelona 24 Hour, Bathurst, BMW Race Driver Series, Earl Bamber Motorsport, TekworkX, Matt Stone Racing and Porsche Carrera Cup Australia, Asia-Pacific and NZ.

Contact Aaron directly: +64 27 449 9654 | aaron@harriscomms.co.nz

Frequently asked questions

What is the difference between the single and dual Nexus jack flush mount?

The dual flush mount provides two Nexus jack connection points for a driver and co-driver or two separate helmet cables. The single flush mount provides one connection point for solo applications.

What cable types are compatible with this mount?

This mount is compatible with Rugged Radios Offroad cables with blue Nexus jacks and STX Stereo cables with grey Nexus jacks. The STX variant has a smaller outside diameter.

Are cables included with the flush mount?

No. Cables are sold separately. The mount includes the billet housing and mounting hardware listed above.

Can I use this in a Can-Am X3 or Polaris RZR?

These are common off-road communication applications. Confirm the available mounting space, cable clearance and the required connector type for your vehicle before ordering.

Is this suitable for race helmets?

Yes, when paired with the compatible Rugged Radios headset or helmet cable for the selected Offroad or STX connection.

Do you ship to Australia?

Yes. We hold NZ stock and ship to Australia. Contact us for AU shipping rates and lead times.