Pyrotect Pro Air Vortex DB Mid Forced Air Helmet, SA2025, 12K Carbon

The Pyrotect Pro Air Vortex is Pyrotect's redesigned SA2025 forced-air carbon helmet, built with a 12K carbon fibre Tri-Weave Composite shell that's vacuum bagged and autoclave cured for strength without excess weight. Harris Race Radios sources this helmet directly from Pyrotect.

• Snell SA2025 rated
• 12K carbon fibre Tri-Weave Composite shell, vacuum bagged and autoclave cured
• Six-pad removable True Fit headliner and cheek pad system for resizing and cleaning
• New head liner air channel design for better adjustability, comfort and airflow
• Corrugated interior ridges for improved heat transfer and reduced fogging
• Stainless steel hardware and Kevlar chinstrap
• Snap-it front latch for secure, easy shield closure and opening
• 0.125" polycarbonate shield with a three-stage pivot positioning system and tear-off post
• Rubber eye port seal and large eye port for greater visibility
• M6 inserts for head and neck restraint (FHR/HANS) devices
• Fire-retardant Nomex interior
• Compatible with Racing Optics or Ultra Shield tear-offs
• Available in sizes 2XS to 3XL
• Product weight from 3.4lb to 3.6lb depending on size

Size Guide

Measure head circumference just above the eyebrows and ears for the best fit. If you're between sizes, size up and use the headliner pads to fine-tune. See our full motorsport helmet fitting guide for a step-by-step walkthrough.

Compliance Note

This helmet is Snell SA2025 rated. Certification requirements vary by event, category, and motorsport organisation, and FHR/HANS compatibility is not guaranteed by the M6 inserts alone. Always check current Motorsport NZ or Motorsport Australia rules and your event's scrutineering requirements before relying on any helmet for competition. See our Helmet Safety Standards guide and SA2025 Helmets NZ guide for more detail.

Circuit Racing vs Offroad Wired Helmets

This Pro Air Vortex is a road-race and circuit-focused forced air helmet and is not supplied radio-wired. If you need a forced-air helmet pre-wired for offroad, speedway, circle track or kart intercom use, see our Pyrotect RACE Pro Airflow Wired Offroad Helmet instead, or read our Maglock forced-air systems guide to understand how forced air and Maglock connections work together.

Frequently Asked Questions

Is this helmet radio-wired?

No, the Pro Air Vortex ships unwired. If you need a helmet pre-wired for radio or intercom use, see our Wired Offroad Pyrotect helmet linked above, or contact us to discuss fitting a radio kit to this helmet.

Will this helmet work with a HANS or FHR device?

It has M6 inserts for head and neck restraint devices, but FHR/HANS approval depends on your specific device, category and event rules. Always confirm compatibility and current scrutineering requirements before relying on it.

How do I pick the right size?

Use the size guide above and measure head circumference just above the eyebrows and ears. If you're between two sizes, size up and use the removable headliner pads to fine-tune the fit.

More From Pyrotect

• Shop the full Pyrotect Helmets NZ & Australia range
• Pyrotect Helmet Shields for SA2020 & SA2025 Helmets
• XStack Tear Offs for Pyrotect, Bell Vortex, M4, K-1, BR-1
• Pyrotect Replacement Helmet Hardware
• Maglock Helmet / Air Hose Connector Kit for your forced-air setup

Need Help Choosing?

Harris Race Radios maintains a broad motorsport helmet range so we can match the right helmet to your radio, intercom and driver requirements. Contact us if you're not sure this is the right helmet or size for your application.