Bell SmartLock Visor Locking Mechanism (7002385)

Available from Harris Race Radios® — your authorised Bell Helmets dealer in New Zealand and Australia.

The genuine Bell SmartLock visor locking mechanism (Bell part 7002385) locks your Bell race helmet's visor securely in the closed position. It is a popular upgrade for circuit racers and rally drivers who want the visor to stay down over kerbs, bumps and compression, or who simply want positive, repeatable visor control without the visor drifting open mid-session.

What the SmartLock Does

• Locks the visor firmly in the closed position at the helmet's pivot
• Quick, positive release when you need the visor open
• Genuine Bell part, designed for Bell's own visor hardware
• Small, light and unobtrusive once fitted

Compatibility — Select Your Helmet Model

• Available for Bell 6 series and 7 series circuit race helmets — select your model from the options above
• 6 series version suits Bell helmets using the SE06 visor system, commonly the HP6 and GT6 family
• 7 series version suits Bell helmets using the SE07 visor system, commonly the RS7, HP7 and GP7 family

Not sure it fits your helmet? Bell has used several pivot systems across its range. Send us your helmet model and, if you can, a photo of the pivot area, and we will confirm the correct SmartLock version before you order. See also our Bell visor pivot kit for SE06 / SE07.

Why Lock a Visor?

Anyone who has raced on a bumpy circuit or over a big compression knows the feeling of a visor creeping open at speed — wind noise, dust and distraction all at once. Rally and offroad crews deal with it constantly. The SmartLock gives you a positive mechanical lock so the visor stays where you put it, which is exactly the kind of small reliability detail our team runs in our own race cars.

Fitment

The SmartLock fits at the visor pivot using Bell's own mounting points, in place of the standard pivot hardware. Basic hand tools are all that is needed, and Harris Race Radios can advise on fitment for your specific helmet. If your helmet is used in sanctioned competition, please confirm any helmet hardware requirements with your championship's scrutineering, as helmet modification rules can vary between classes and organisers.

Keep Your Bell Helmet Race-Ready

• Browse our full motorsport helmet range for NZ & AU — one of Australasia's largest Bell, Stilo and Roux selections
• Expert Motorsport Advice — talk to real race engineers about helmets, communications and fitment before you buy

Why Buy From Harris Race Radios?

Harris Race Radios is an authorised Bell Helmets dealer, and helmets are the critical part of any motorsport communications system — which is why we stock one of Australasia's broadest motorsport helmet ranges and the visor, pivot and tear-off parts to keep them serving race after race.

Our team brings real motorsport expertise across both NZ and AU. Rex Harris is a qualified Radio Telecommunications Engineer, Approved Radio Certifier for NZ RSM and AU ACMA, with motorsport experience dating back to 1975 at the Marlboro Series Grand Prix. Aaron Harris is an active racing driver and race engineer - Barcelona 24 Hour 1st in class (2013), Bathurst 1000 and 12 Hour competitor, BMW Race Driver Series Champion (2011), and race engineer for Earl Bamber Motorsport, TekworkX, Matt Stone Racing, and Porsche Carrera Cup Australia/Asia-Pacific/NZ. Aaron is also an MSNZ Licence Examiner for helmets, racewear, FHR, and HANS.

Contact Aaron directly: +64 27 449 9654 | aaron@harriscomms.co.nz

Frequently Asked Questions

Which helmets does the Bell SmartLock fit?

It is available for Bell 6 series and 7 series circuit race helmets. The 6 series version suits the SE06 visor system (HP6 and GT6 family), and the 7 series version suits the SE07 visor system (RS7, HP7 and GP7 family). Contact us with your helmet model and we will confirm fitment before you order.

Which SmartLock version do I need?

Choose the 6 series option for Bell helmets using the SE06 visor system, and the 7 series option for helmets using the SE07 visor system. If you are unsure, contact us with your helmet model and, if possible, a photo of the pivot area.

Is this a genuine Bell part?

Yes. This is the genuine Bell SmartLock visor locking mechanism, Bell part number 7002385.

Is it difficult to install?

It fits at the visor pivot using Bell's own mounting points with basic hand tools. Contact us and we will walk you through fitment for your helmet.

Can I use tear-offs and sunshades with it?

Yes — the SmartLock works with your existing visor setup, including tear-offs. See our genuine Bell tear-offs and Bell sunshade visors.

Do you ship to Australia?

Yes. We hold NZ stock and ship to Australia. Contact us for AU shipping rates and lead times.