AiM MXS Strada 5-inch Dash Display | Racing & Street

AiM MXS Strada 5-inch Dash Display

The AiM MXS Strada is a high-contrast 5-inch colour TFT dash display for race-car, race-bike, and street installations. This is the Strada display version with no data logging, designed to present the vehicle information you need clearly rather than record a complete data-logging session.

Choose the loom option that matches the installation, either CAN or OBDII where supported. The display is configured through Race Studio 3, with custom pages, measurement units, alarms, shift lights, and compatible expansion equipment set around the vehicle.

Fitment matters. ECU protocols, wiring, sensors, OBDII support, CAN messages, and expansion compatibility depend on the vehicle. Contact Harris Race Radios before ordering if you need help confirming the correct loom or installation plan.

Display and vehicle information

The MXS Strada can show information supplied by the vehicle ECU, analogue and digital inputs, predefined maths channels, and compatible optional GPS or expansion hardware. Depending on the configured installation, display pages can include speed, RPM, water temperature, oil pressure, lap times, fuel, and other supported channels.

• 5-inch colour TFT display with high contrast and an ambient light sensor to help maintain visibility.
• CAN or OBDII loom options for supported vehicle installations.
• Configurable display pages with selectable page styles, data fields, scales, and measurement units.
• Street Icons version for road-oriented information such as fuel, oil, and water temperature where configured.
• Ten multicolour RGB shift lights with configurable RPM thresholds and patterns.
• Configurable RGB alarm LEDs with conditions, colours, flashing behaviour, text messages, and priorities.
• Push-button page control for changing pages and recalling available session information.

AiM MXS Strada high-contrast TFT display.

Configured display-page example.

Expansion and compatible inputs

The built-in CAN system can support compatible expansion equipment and additional vehicle information. Depending on the installation, the MXS Strada can work with compatible GPS, memory, Channel Expansion, Lambda Controller, ABS, traction-control, infrared-temperature, and other AiM modules.

Available data depends on the vehicle, ECU protocol, wiring, sensor type, and selected hardware. The MXS Strada is a configurable display, not a substitute for confirming the complete vehicle electronics plan.

Example of compatible AiM expansion hardware.

Race Studio 3 configuration

Race Studio 3 is used to create, modify, import, and export compatible configurations for the MXS Strada. It manages the available ECU drivers, channels, maths channels, display pages, digital output, alarms, shift lights, and expansion settings.

MXS Strada configuration reference.

Important: the MXS Strada version on this page does not provide the same data-logging workflow as the AiM MXS 1.3 Dash Logger. If you need session recording and analysis, compare it with the AiM MXS 1.3 Dash Logger instead.

Official AiM and Race Studio videos

These official AiM videos support configuration and Race Studio 3 workflows. For the complete official library, visit the AiM Academy Training Videos page.

MXS Strada support

Use the AiM Race Studio 3 Knowledge Hub for configuration and troubleshooting workflows. Visit AiM Downloads & Documentation for official live AiM software, firmware, and product-documentation sources.

For CAN or OBDII loom selection, ECU compatibility, Street Icons use, expansion planning, or installation advice in New Zealand and Australia, contact Harris Race Radios.