What Is a MyLaps Transponder? How Race Timing Works
Tegan HarrisA MyLaps race transponder is a small electronic device mounted to a race vehicle. It sends a unique identifying signal to compatible timing equipment at the circuit. That identification lets the timing system associate a recorded passing with the correct competitor.
This beginner guide explains how electronic race timing works. If you are deciding which model to use, read Which MyLaps Transponder Do I Need?. To see current units and accessories, browse the MyLaps Transponders collection.
What does a race transponder do?
The transponder identifies the vehicle as it passes a timing point. It is one part of the timing system, alongside the track's detection loops, decoder and timing software. A personal transponder is not a standalone GPS lap timer: it needs a compatible track timing system to generate those recorded passings.
MyLaps also supplies timing technology for other sports, including cycling and running. Those applications use their own equipment and configurations; a device used for one sport should not be assumed suitable for another.

How does a MyLaps transponder work?
Detection loops act as antennas for the timing system. When a vehicle passes over a loop, the loop receives the transponder's signal and passes it to a decoder. The decoder identifies the transponder and determines the time of its passing, then sends the information to the rest of the timing system.
How are lap times recorded?
Timing software uses recorded passings at the relevant timing line to calculate lap times. Additional detection points can provide intermediate timing information where the circuit has that equipment installed. The transponder number must be associated with the correct competitor in the event's timing records.
The timekeeper uses the event's timing and scoring system to produce results. What competitors can see online depends on the event's setup and publication of that data.
What is Speedhive?
MyLaps Speedhive provides access to published practice and race results. Depending on what the venue makes available, competitors and supporters can review lap times, follow live timing and look back at past events. You can also explore Speedhive practice results.
Viewing online results and activating a TR2 are different tasks. For registration, activation, subscription renewal and expiry help, use our MyLaps TR2 Subscription Guide.

Does every race use the same transponder?
No single model should be assumed to suit every event. The racing discipline, timing system and organiser's requirements determine which model you need. The detailed comparisons between Speedway, Car/Bike/Offroad, MX, Motorbike, Kart and Direct Power belong in our MyLaps transponder-selection guide, rather than this introduction to timing principles.
Why do mounting and power matter?
The transponder must have the power it needs and be installed in the position and orientation specified for its model and event. Secure mounting also helps prevent equipment loss during racing. Follow the model's instructions and use the MyLaps TR2 Installation Guide for the next steps. Confirm the transponder number and timing operation with the event timekeeper before racing.
Where to go next
- Choose the correct MyLaps transponder for your discipline and power requirements.
- Get TR2 subscription and activation help.
- Shop MyLaps transponders and accessories for current product specifications and purchase options.