XRON SA2025 Motorsport Helmet with Speakers (3.5mm)

XRON SA2025 Motorsport Helmet with 3.5mm Speakers

For competitors who want quality motorsport protection and one-way Race Control audio without paying for a full two-way comms system, this is the best-value XRON SA2025 helmet with speakers already fitted. The helmet carries Snell SA2025 homologation, the latest Snell motorsport standard, and has factory-fitted speakers with a 3.5mm connection for a compatible one-way receiver. Harris Race Radios is the exclusive Australasian importer, distributor and dealer for XRON, with NZ stock and shipping to Australia.

Choose this version if you need to hear Race Control through your helmet. The XRON base helmet costs less but has speaker cups without speakers. For a microphone and compatible two-way driver-to-crew communications, compare the XRON integrated-comms helmet.

What You Get

• Snell SA2025 homologation — check the helmet label and your current event/category rules.
• Factory-fitted speakers with a 3.5mm connection for a compatible one-way receiver; this model has no microphone for two-way communication.
• Speaker cups and comms-ready interior without an aftermarket speaker installation.
• FHR/HANS provision — threaded M6 mounting points; choose the compatible post option on the product before ordering if needed. Check post and restraint fitment for your event.
• NZ stock, AU shipping and support matching the helmet audio to your receiver.

Sizes & HANS Post Options

Current variants are S (56cm), M (57cm), L (58–59cm), XL (60–61cm) and XXL (62–63cm), each with a no-post and an add-post option. Select the size and post choice above; pricing depends on the variant selected. Measure around the widest part of your head above the eyebrows, then check fit carefully. A helmet should sit snugly without painful pressure or movement; contact us if you need sizing advice.

One-Way Audio & Event Use

Connect the fitted 3.5mm speakers to a compatible receive-only Race Control receiver. Confirm its connector and the programming required for your meeting before buying. A one-way receiver lets you listen; it does not permit transmission on controlled Race Control channels. For rally or any discipline requiring driver-to-crew or driver-to-co-driver speech, select a helmet and intercom system with a compatible microphone instead.

Snell SA2025 in NZ & AU

SA2025 is the latest Snell motorsport helmet standard and is acceptable in New Zealand and Australia. Your event, category and series may impose additional requirements. Check the current MotorSport NZ Schedule A or Motorsport Australia regulations, the helmet's own homologation label, helmet condition and any FHR/post requirements before competing. SA2025 is a helmet standard, not a MotorSport NZ certification of the seller.

Why Buy from Harris Race Radios?

Harris Race Radios is the exclusive Australasian XRON importer, distributor and dealer. Aaron Harris is an active racing driver, race engineer and MotorSport NZ Licence Examiner. He can offer practical product and event-rule guidance; that role is not a helmet-examiner certification. Rex Harris is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for NZ RSM and AU ACMA, with motorsport radio experience dating back to 1975. We can help match a receiver and helmet audio setup to your needs.

Compare all three XRON SA2025 helmets in our NZ & AU guide, or read more helmet advice. For help, call Aaron on +64 27 449 9654 or email Aaron.

Frequently Asked Questions

Is this the lowest-priced XRON SA2025 helmet?

No. The base XRON SA2025 helmet costs less and has empty speaker cups. This model is the best-value XRON choice when you want speakers already installed for one-way listening.

Can I transmit using this helmet?

No microphone is fitted. The 3.5mm speakers are intended for listening through a compatible receiver. Choose the integrated-comms model for a compatible two-way system, where your event permits it.

Is Snell SA2025 acceptable for NZ and AU motorsport?

SA2025 is the latest Snell motorsport helmet standard and acceptable in NZ and AU. Confirm the current standard, event/category rules and any FHR requirements for your specific competition before buying.

Which sizes and HANS post options are available?

The current options are S (56cm), M (57cm), L (58–59cm), XL (60–61cm) and XXL (62–63cm), each with no-post or add-post variants. Select the correct variant and check the helmet/FHR combination required by your event.