Schroth Clubman 2X2 Harness FHR 2025

Schroth Clubman 2x2 Racing Harness — FIA 8853-2016 | FHR/HANS

The Schroth Clubman 2x2 is a FIA 8853-2016 homologated 6-point racing harness with FHR-specific 2" (50mm) shoulder belts designed for use with HANS and FHR devices. Proven Schroth quality and full FIA homologation at an accessible price point — the entry point to the Schroth harness range for club racers, national-level competitors, and track day drivers across NZ and Australia.

Harris Race Radios is an authorised Schroth dealer, with local NZ stock and direct shipping to Australia.

Key Features

• FIA 8853-2016 homologated — meets the required standard for most MSNZ and Motorsport Australia categories
• 6-point harness — two shoulder, two lap, and two crotch/anti-submarine belts for full occupant retention
• FHR-specific 2" (50mm) shoulder belts — designed for HANS and FHR device compatibility
• 2" (50mm) lap belts — Clubman specification webbing throughout
• Proven Schroth quality construction — Schroth has been manufacturing motorsport safety harnesses for over 75 years
• Ideal for club circuit, national racing, rally, and track days

Who Is The Clubman Harness For?

The Schroth Clubman 2x2 is designed for club competitors, track day drivers, and national-level racers looking for proven FIA-approved motorsport safety equipment without stepping up to the higher-cost Profi and Enduro ranges. If you need a reliable, FIA 8853-2016 homologated 6-point racing harness for competition or track use, the Clubman is the starting point in the Schroth range.

Suitable for:

• Circuit racing — club and national level competition
• Rally competition — MSNZ and Motorsport Australia sanctioned events
• Hillclimb events — speed events requiring FIA-approved safety equipment
• Time attack — track performance events requiring competition harness
• Endurance racing — suitable for shorter endurance formats; see the Schroth Enduro 2x2 for long-distance endurance racing
• Track day vehicles — paired with a FIA-approved racing seat for track day use

Clubman vs Profi vs Enduro — Which Schroth Harness Do You Need?

✓ Why You Can Buy With Confidence

• ✓ Authorised Schroth dealer — genuine stock, not grey imports
• ✓ NZ stock held — fast local dispatch
• ✓ Ships direct to Australia
• ✓ MSNZ-certified installation guidance included
• ✓ Fitting and compliance advice from Aaron Harris — active race driver and MSNZ Licence Examiner

📖 Before fitting, read the HRR Racing Harness Installation Guide — correct geometry, torque specs, and fitting instructions from our MSNZ-certified race engineers.

Harris Race Radios — Authorised Schroth Dealer NZ & AU

Harris Race Radios is NZ and Australia’s most experienced motorsport safety specialist, supplying genuine Schroth racing harnesses with local NZ stock for fast dispatch. We ship directly to Australia.

Rex Harris is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for NZ RSM and AU ACMA, with motorsport involvement since 1975 starting at the Marlboro Series Grand Prix. Aaron Harris is an active racing driver and race engineer — Barcelona 24 Hour 1st in class (2013), Bathurst 1000 and 12 Hour competitor, BMW Race Driver Series Champion (2011), race engineer for Earl Bamber Motorsport, TekworkX, Matt Stone Racing, and Porsche Carrera Cup Australia/Asia-Pacific/NZ — and an MSNZ Licence Examiner for helmets, racewear, FHR, and HANS devices. Aaron inspects and approves harnesses for MSNZ competition — he knows exactly what scrutineers look for.

📞 Call or text Aaron: +64 27 449 9654 | ✉️ aaron@harriscomms.co.nz

Related Products

• Schroth Harnesses — Full Range NZ & AU
• Schroth Profi 2x2 — Professional Benchmark
• Schroth Enduro 2x2 — Endurance Racing
• HANS & FHR Devices
• Racing Seats — FIA 8855-1999
• Racing Harness Installation Guide

Frequently Asked Questions

Is the Schroth Clubman approved for MSNZ and Motorsport Australia events?
Yes — the Schroth Clubman 2x2 is FIA 8853-2016 homologated, the required standard for most MSNZ and Motorsport Australia categories. Always confirm with your specific series regulations as some categories specify minimum homologation years or additional requirements.

Is this a 6-point harness?
Yes — the Schroth Clubman 2x2 is a 6-point racing harness, with two shoulder belts, two lap belts, and two crotch/anti-submarine belts for full occupant retention in competition use.

How long is FIA homologation valid?
FIA harness homologation is valid for a set period from the date of manufacture (typically 5 years for FIA 8853-2016 harnesses in competition use). The homologation expiry date is printed on the harness label. Check your specific series regulations and the harness label for your expiry date. Contact Aaron Harris if you need clarification on homologation validity for your category.

Does this harness require a HANS device?
The Schroth Clubman 2x2 features FHR-specific shoulder belts designed for use with HANS and FHR devices. Whether a HANS or FHR device is mandatory depends on your specific series regulations. MSNZ and Motorsport Australia mandate FHR/HANS use in most competition categories — check your series regulations or contact Aaron Harris, who is an MSNZ Licence Examiner for FHR devices.

Is the Clubman HANS compatible?
Yes — the Schroth Clubman 2x2 features 2" (50mm) FHR-specific shoulder belts designed for use with HANS and FHR devices. These belts feed through the shoulder slots of your HANS or FHR device correctly.

Can this be used in rally cars?
Yes — the Schroth Clubman 2x2 is FIA 8853-2016 homologated and suitable for rally competition. Confirm with your rally series regulations for any specific harness requirements, particularly regarding homologation year and crotch strap configuration.

What racing seats is this compatible with?
The Schroth Clubman 2x2 is compatible with FIA-approved racing seats that have the correct belt slot geometry for 2" (50mm) shoulder and lap belts. See our Racing Seats collection for compatible FIA 8855-1999 seats. Contact Aaron Harris for advice on harness and seat compatibility for your specific setup.

Is the Clubman suitable for track days?
Yes — the Schroth Clubman is suitable for track day use when fitted in a vehicle with a compatible FIA-approved racing seat. Always ensure the harness is correctly installed per the HRR Racing Harness Installation Guide. Note that some track day organisers have specific harness requirements — check with your event organiser.

What is the difference between the Clubman and the Profi?
The Clubman delivers proven Schroth quality and FIA 8853-2016 homologation at a more accessible price point than the Schroth Profi 2x2. It is ideal for club and national circuit competitors who want Schroth engineering without the premium of the Profi. The Profi is aimed at professional and top-level competition use.

How do I install it correctly?
See the HRR Racing Harness Installation Guide for correct geometry, torque specifications, attachment options, and fitting instructions prepared by MSNZ-certified race engineers. Incorrect installation can compromise safety — if in doubt, contact Aaron Harris for advice.