Rugged Radios POINT5 GPI UHF CB Off-Road Antenna | NZ & AU

The Rugged Radios POINT5 GPI UHF CB off-road antenna is a strong, spring-loaded aerial for genuine off-road vehicles in New Zealand and Australia. Its rugged construction and sprung section help it take the knocks and low tree branches encountered on demanding tracks, rather than being selected only for road-going looks.

POINT5 is a ground-plane-independent (GPI), also described as no-ground-plane (NGP), tuned whip antenna. Match it to your UHF CB radio, mounting position and installation before ordering.

Spring-loaded construction for real off-road use

For 4WDs and off-road vehicles travelling through scrub and under low branches, the spring-loaded section allows the aerial to give under contact. This makes POINT5 a practical choice where knocks and vibration are part of the journey. It is rugged, not indestructible: choose a mounting position that protects the antenna and inspect the mount and cable after a substantial impact.

A sound vehicle-to-vehicle radio link helps groups coordinate convoy stops, track obstacles and recovery arrangements. Radio setup, antenna placement, mounts, coaxial cable and connectors all matter. Terrain and obstacles affect range, so we do not promise a fixed communication distance.

What ground-plane-independent means

A conventional ground-plane-dependent antenna uses a suitable conducting surface as part of its antenna system. A GPI design does not rely on a large metal vehicle roof to provide that ground plane. That makes the design useful when selecting an aerial for installations without a suitable metal roof or ground-plane surface.

GPI does not mean every bracket, base or mounting location is interchangeable, or that the mount and connections can be ignored. Nearby metalwork, mounting position and cable condition still affect the installed system. Read our ground plane and ground-plane-independent aerial advice, including the explanation of what an antenna ground plane does.

POINT5 product details

• Brand: Rugged Radios.
• Part number and SKU: POINT5.
• Application: NZ and Australian UHF CB off-road communications.
• Antenna design: ground-plane-independent tuned whip.
• Spring-loaded construction for knocks and branch contact in off-road use.

Ask us to confirm any exact frequency coverage, power rating, length or mounting standard needed for your radio and vehicle. Do not use the wording in a product URL as a technical specification.

Installation, mounts and cable checks

Send us your radio model, vehicle, proposed antenna location, existing base and connector type. Clear photos help us identify the parts required. The vehicle photos are installation examples, not a promise that brackets, cables, lights or other equipment are included. Confirm package contents and any separately required installation parts with our team.

Read our antenna installation, tuning and testing guide for mounting, cable routing and installed-system checks. Check the antenna and connection before transmitting, especially after removing equipment for transport or storage.

Explore antenna options

Compare the Rugged off-road antennas, antenna and aerial range and Rugged antenna collection. For the rest of your installation, browse radios and accessories or the Rugged Radios range.

The supplier feature diagram in the gallery carries US GMRS wording. This listing is for NZ/AU UHF CB off-road applications; the artwork is not a claim that a US-programmed radio is suitable for your local system. Have the supplied antenna and radio configuration matched to your use.

NZ and Australian radio-engineering authority

Harris Race Radios™ is the Exclusive Official Authorised Distributor and Dealer for Rugged Radios in Australasia. We supply, install, engineer and repair communications equipment, matching antennas, mounts, cables and radios as a system.

Rex Harris is a degree-holding radio electronics engineer, an Approved Radio Engineer and an Approved Radio Certifier for NZ RSM and AU ACMA. His motorsport radio experience dates from the 1975 Marlboro Series Grand Prix. His expertise supports antenna selection, installation checks and fault diagnosis.

Aaron Harris contributes active racing and professional race-engineering experience, including Porsche Carrera Cup and endurance racing. His practical track experience is distinct from Rex's radio-engineering and certification credentials.

For NZ and Australian supply or installation advice, contact Rex on 021 682 912 or rex@raceradios.co.nz, or visit our expert motorsport advice page.

Frequently asked questions

What does GPI mean?

GPI means ground-plane-independent. This antenna design does not rely on a large metal vehicle roof to provide a ground plane, but it still needs a suitable mount, cable and installation.

Why choose POINT5 for genuine off-road vehicles?

Its strong construction and spring-loaded section help it take knocks and low tree-branch contact on demanding tracks. It is not indestructible; protect the installation and inspect it after impacts.

Does it fit any mount?

No. GPI does not make every base or bracket interchangeable. Have the antenna mounting arrangement, cable and radio connector checked together.

Are the vehicle accessories shown included?

The gallery shows example installations. Brackets, cables, driving lights and other vehicle equipment are not implied to be included. Confirm the supplied package and any required additional parts.

How far will it communicate?

There is no fixed range promise. Terrain, obstacles, mounting position, radio setup and the other station's equipment affect the link.

Why does a gallery image mention GMRS?

It is supplier artwork using US terminology. This listing is positioned for NZ and Australian UHF CB off-road use, with antenna and radio-system matching.

Can Harris Race Radios help with installation?

Yes. Our radio-engineering team can advise on aerial selection, mounting, coaxial cable, connectors and system checks. Send your radio model and installation photos to Rex Harris.