AiM MXG 1.3 7-inch Dash Logger with GPS

AiM MXG 1.3 7-inch Dash Logger with GPS

The AiM MXG 1.3 is a wide-format motorsport dash logger designed to acquire and display data from the ECU, included GPS 08 module, internal inertial sensors, analogue and digital inputs, and configurable maths channels. Its 7-inch display suits wide cockpit installations, while the built-in CAN bus allows compatible expansion modules to be added as the vehicle develops.

Configure the display pages, channels, alarms, shift lights, digital outputs, and expansions in Race Studio 3. Recorded data can then be downloaded and analysed on a computer.

Display and driver information

• 7-inch TFT display with 800 × 480 pixel resolution.
• 1,000:1 contrast and listed brightness of 700 cd/m², 1,100 lumen.
• Ambient light sensor for automatic backlight adjustment.
• Eight freely configurable RGB alarm LEDs.
• Ten integrated RGB shift-light LEDs with configurable patterns.
• Custom pages with selectable data, end-of-scale values, measurement units, and page switching by pushbuttons.

Alarm conditions, colours, priorities, flashing frequencies, accompanying text, and gear-specific shift-light patterns can be configured for the vehicle and driver.

Data acquisition and connectivity

• GPS 08 module included in the kit for track position and lap-data workflows.
• Four GB internal memory.
• Three CAN connections, including expansion capability.
• ECU connections via CAN, RS232, or K-Line.
• Listed compatibility with more than 1,000 industry-leading ECUs.
• Eight configurable analogue inputs, up to 1,000 Hz each.
• Four speed inputs, lap signal input, and coil RPM input.
• Two low-side digital outputs, rated at 1 A maximum each.
• Secure 802.11 Wi-Fi for configuration, calibration, and wireless data download.
• CAN output for sending messages to an existing vehicle CAN network.

Available ECU channels and data depend on the vehicle ECU, driver, wiring, and supported protocol. Confirm the actual ECU compatibility and channel requirements before ordering.

Internal motion sensing and expansion

• Internal three-axis accelerometer, ±5 G.
• Three-axis gyroscope.
• Three-axis magnetometer.
• Expansion support for GPS, channel expansion, thermocouple expansion, lambda control, SmartyCam HD cameras, and Memory Module functions where compatible.

Expansion modules require compatible wiring, CAN configuration, physical space, and Race Studio 3 support. Confirm the complete system before purchase.

Race Studio 3 workflow

Race Studio 3 manages MXG 1.3 configuration, ECU drivers, channels, maths channels, display pages, digital outputs, alarms, shift lights, track maps, and supported expansions. Use it to download and analyse recorded data with graphs, histograms, tables, and track-map views.

Race Studio 3 track-map visualisation shown in official AiM documentation.

Race Studio 3 data-analysis interface shown in official AiM documentation.

Use the AiM Race Studio 3 Knowledge Hub for configuration and data-analysis workflows. Visit AiM Downloads & Documentation for official live AiM software, firmware, and documentation sources.

Confirmed technical specifications

• Body: anodised aluminium.
• Connectors: two motorsport connectors and one Binder connector.
• Push buttons: metallic.
• Power consumption: 400 mA.
• Dimensions: 237 × 127.6 × 26 mm.
• Weight: 950 g.
• Water resistance: IP65 as listed for the product.

Confirm installation clearance, connector access, harness routing, power supply, ECU connection, and sensor wiring for the actual vehicle before installation.

Official AiM MXG workflow videos

These official AiM videos cover the Race Studio workflows most relevant to configuring, downloading, and maintaining the MXG 1.3. They are workflow resources rather than claims that every function is available on every vehicle.

MXG 1.3 FAQ

For MXG 1.3 ECU compatibility, GPS, CAN wiring, expansion modules, Race Studio 3 setup, or dash installation in New Zealand and Australia, contact Harris Race Radios.

Browse the AiM Car Systems and AiM Logging and Display Dashes collections.