AiM MyChron 6 2T Kart Data Logger & Lap Timer | Dual Temperature

AiM MyChron 6 2T Kart Data Logger & Lap Timer

The AiM MyChron 6 2T is a kart-focused dash, lap timer, and data logger with support for two temperature channels. It is intended for drivers and teams who need to review compatible engine and chassis data through the MyChron display and Race Studio 3 workflow.

Choose the sensor package carefully. This product record has selectable sensor and patch-lead configurations, including a no-sensor option. The selected option determines what is supplied, so do not assume that a temperature sensor or cable is included unless it is named in the chosen option.

The MyChron 6 2T is a dual-temperature-capable logger, not a promise that every kart, engine, sensor, or patch cable will work without confirmation. Check the MyChron model, engine, class requirements, sensor type, connector, lead routing, and available input before ordering.

Selectable sensor and patch-lead packages

The current product record lists these selectable configurations:

• No sensor or patch cable.
• CHT or under-plug temperature sensor with black/yellow patch lead.
• CHT or under-plug temperature sensor with yellow/yellow patch lead.
• M10 water-temperature sensor with black/black patch lead.
• M10 water-temperature sensor with black/yellow patch lead.
• M12 KF Type EGT sensor with black/yellow patch lead.
• M12 KF Type EGT sensor with yellow/yellow patch lead.
• M5 standard Type EGT sensor with black/yellow patch lead.
• M5 standard Type EGT sensor with yellow/yellow patch lead.
• M5 water-temperature sensor with black/black patch lead.
• M5 water-temperature sensor with black/yellow patch lead.

Patch-lead colour and sensor selection must match the intended temperature measurement and MyChron wiring arrangement. Confirm the exact option shown in the cart before checkout.

Listed MyChron 6 2T functions

• Two temperature inputs for compatible water, EGT, CHT, or other supported temperature configurations.
• GPS-based lap-timing and track-data functions listed for the MyChron 6 platform.
• RPM acquisition, display pages, shift lights, and alarms configured for the connected kart and engine.
• Race Studio 3 software for compatible setup, downloads, and data analysis.
• Wireless and USB-C data-transfer functions are listed for the platform. Confirm the current software, firmware, and connection requirements before relying on them at an event.
• Dash display and data logging in one kart-focused unit. It is not a standalone ECU, engine controller, or replacement for correct engine instrumentation.

Available channels, recording behaviour, accuracy, memory, battery, weather protection, and sensor compatibility depend on the exact MyChron model, firmware, configuration, and selected equipment. Check current AiM documentation for technical specifications before making a purchase decision.

Installation and setup checks

• Confirm whether the kart needs water temperature, EGT, CHT, under-plug temperature, or another supported channel.
• Confirm the selected sensor, patch-lead colour, connector, and cable route before ordering.
• Mount the display securely and keep sensor leads away from exhaust heat, abrasion, moving parts, and steering movement.
• Configure the correct sensor type, channel, alarm limits, units, and display page in the supported AiM software.
• Check the live reading against expected engine behaviour before relying on it for tuning, alarms, or race decisions.

Sensor installation and engine-temperature interpretation should be handled by someone familiar with the kart, engine, cooling system, exhaust, and applicable class rules.

Race Studio 3 and support

Use Race Studio 3 for compatible MyChron configuration, session downloads, and analysis. Visit the AiM Race Studio 3 Knowledge Hub for setup and data workflows, and AiM Downloads & Documentation for official live AiM software, firmware, and product-documentation sources.

MyChron 6 2T FAQ

Official AiM setup and data videos

These official AiM videos support the broader MyChron and Race Studio workflow. They may show another MyChron generation, so confirm model-specific functions and connections against the current AiM documentation.

For MyChron 6 2T selection, sensor and patch-lead fitment, EGT/CHT/water-temperature setup, or kart data advice in New Zealand and Australia, contact Harris Race Radios.