Rugged Radios & Kenwood K1 2-Pin Headset Coil Cable | CC-KEN

The Rugged Radios CC-KEN headset coil cable connects listed Rugged Radios and Kenwood K1-style 2-pin handheld radios to a compatible 5-pin motorsport headset or intercom interface. It also supports the selected Baofeng, Blackbox and RELM applications below. Confirm the exact radio model, connector wiring and headset interface before ordering.

Compatible Radios — K1 Connector

Rugged Radios handheld models

R1, V3, RH5R (RH-5R), RDH16 (RDH-16), GMR2, GMR2 PLUS, RDH-X and RDH-X-HV.

Kenwood

TK208, TK220, TK240, TK248, TK250, TK260, TK270, TK308, TK320, TK340, TK348, TK350, TK353, TK360, TK370, TK430, TK431, TK2100 (ProTalk), TK2102 (ProPower), TK2130 (ProTalk XLS), TK2160, TK2170, TK2200, TK2202, TK2212, TK2300, TK2360, TK3000, TK3100 (ProTalk), TK3102 (ProPower), TK3130 (ProTalk XLS), TK3160, TK3170, TK3173, TK3200, TK3201, TK3202, TK3212, TK3230, TK3300, TK3360, NX220, NX240 series, NX1200/1300, NX320, NX340

Baofeng

Selected handheld models with a K1-compatible 2-pin socket and wiring. Confirm your exact model before ordering; connector shape alone doesn't confirm compatibility.

Blackbox

Bantam, Pocket, SHIFT radios

RELM

RPV516A, 599A Plus, RPU416A, 499A Plus, RP4200

Cable Features

• Part number and SKU: CC-KEN.
• Polyurethane outer jacket — flexible and durable.
• Retractable coil cord.
• 2-part tough moulding.
• K1-style 2-pin radio connector.
• 5-pin industry-standard headset connector; check the exact wiring and interface.
• Spiral shielding for RF and EM interference protection.

Match both ends of the communications system

Confirm microphone type, pin wiring and push-to-talk operation with your actual radio and headset or intercom. A physically fitting plug alone does not establish full transmit and receive operation.

In circuit racing, clear driver–pit and crew communications help coordinate pit work and relay developing vehicle problems. Rally and off-road systems depend on intelligible driver–navigator and crew audio. The correctly matched cable is one part of that complete system, not a receiver, radio or complete headset.

For OFFROAD-wired helmet or headset interfaces, compare the OFFROAD headset/helmet coil cable. Do not assume its headset-side connector is interchangeable with this 5-pin cable.

NZ and AU radio use

Cable compatibility does not confirm that a transmitting radio is suitable for operation in NZ or Australia. Check the exact radio's certification, programming, frequencies and intended use separately. GMR2 and GMR2 PLUS references here concern accessory fitment, not an endorsement of US GMRS operation in NZ/AU.

NZ and Australian engineering support

Harris Race Radios™ is the Exclusive Official Authorised Distributor and Dealer for Rugged Radios in Australasia. We supply, install, engineer and repair motorsport communications equipment, including matching handheld radios, cables, headsets and intercoms.

Rex Harris is a qualified Radio Telecommunications Engineer and an Approved Radio Certifier, RSM ARC127 and ARE127; his motorsport radio experience dates to the 1975 Marlboro Series Grand Prix. Aaron Harris is an active racing driver and professional race engineer, including Porsche Carrera Cup and endurance racing, and a MotorSport NZ Licence Examiner. Their distinct expertise supports practical equipment selection and installation.

NZ & AU Supply

Stock held in New Zealand for fast local dispatch. Ships regularly to Australia. Contact Aaron for fitting advice on +64 27 449 9654 or aaron@harriscomms.co.nz. See our expert motorsport advice.

Not Sure Which Cable You Need?

See our 2-Way Radio Connector Guide to identify your radio's connector type. Browse headset cables, the Rugged Radios range and radios and accessories.

Related Cables

• Kenwood NEXEDGE / K2 Connector Cable — for the listed NX200, NX300, NX5200 and NEXEDGE applications; check the exact model rather than assuming all NX radios share one connector.
• Motorola 2-Pin / M1 Connector Cable — compare for the listed CP, GP and CLS Motorola applications.
• Motorola GP328 / M4 Connector Cable — compare for the listed GP328, HT1250 and PRO5150 applications.

Frequently Asked Questions

What is a K1 connector?

It is the Kenwood-style 2-pin accessory connection used by the compatible radio models listed above. Match wiring and the headset interface as well as connector shape.

Which Rugged Radios handheld models are listed?

R1, V3, RH5R, RDH16, GMR2, GMR2 PLUS, RDH-X and RDH-X-HV. Confirm the actual radio and headset arrangement before ordering.

Will this cable work with my Kenwood TK series radio?

The Kenwood TK and NX applications listed above are retained. If your exact model is not listed, contact Aaron Harris for confirmation.

Will this cable work with Baofeng radios?

Selected Baofeng models with compatible K1-style 2-pin sockets and wiring may work. Confirm the exact model. Cable fitment does not confirm the radio's suitability for NZ/AU operation.

Are Blackbox and RELM applications still included?

Yes. The listed Blackbox Bantam, Pocket and SHIFT radios, and RELM RPV516A, 599A Plus, RPU416A, 499A Plus and RP4200 applications are retained. Check the actual connector and audio arrangement.

Does it fit every 5-pin headset?

Do not assume so. Confirm headset wiring, microphone type and push-to-talk operation with the radio or intercom interface.

Do you ship to Australia?

Yes. Harris Race Radios™ ships to Australia with stock held locally in New Zealand for dispatch.