Bell Short Adjustable Sunscreen Visors For Bell 10-Series Helmet HP-10 / Mag-10

The Bell M10 Short Adjustable Sunscreen reduces sun reflection and light transmission on selected Bell HP10 and Mag-10 open-face motorsport helmets. It sits beneath the peak, with adjustable height so you can position the shade for your driving view in bright conditions.

Sunscreen only: this is a glare-management accessory, not a protective shield or a replacement peak. Bell does not warrant it shatterproof. The helmets shown illustrate fitment.

HP10 and Mag-10 fitment

Listed applications include HP10, HP10 Rally, Mag-10 Carbon, Mag-10 Pro, Mag-10 Rally Carbon, Mag-10 Rally Pro and Mag-10 Rally Sport. Match the exact helmet generation, existing sunscreen reference and mounting arrangement before ordering. A shared Bell series number alone is not a fitment check.

Compare Bell rally and open-face helmets if you are choosing a complete helmet. For a damaged peak rather than the tinted insert, use the model-specific Bell replacement peak listing.

Five colour options

Bell recommends tinted and mirror-coated sunscreens for daytime use only. Select a colour suitable for the conditions; do not rely on tint names as a measured light-transmission specification.

Fitting, adjustment and care

The M10 sunscreen uses its specific peak, pivot and brake-washer arrangement. Follow the supplied Bell M10 sunscreen instructions, keep the correct washers in place and check secure fit and smooth operation. Do not overtighten or use thread lock. Do not substitute instructions for an unrelated full-face shield.

The sunscreen is polycarbonate and can be seriously damaged by common chemicals. Clean the inner side only with a dry, soft microfibre cloth or shield pouch: no liquids or chemicals. For the outer side, Bell specifies window cleaner or a Bell-specific product. Do not use brake cleaner, gasoline, fuel, solvents or other aggressive products.

Bell M10 fitting instructions and download

Download the official Bell M10 adjustable sunscreen fitting and care instructions (PDF), hosted by Harris Race Radios™. Bell specifies a maximum tightening torque of 4.0 N·m and no thread lock. Use the complete instructions for the correct pivot and brake-washer sequence; the torque limit is not a reason to overtighten the brake adjustment.

Practical Bell support in New Zealand and Australia

Harris Race Radios™ is an authorised Bell Helmets dealer in New Zealand and Australia. Aaron Harris brings active racing and professional race-engineering experience to practical model and fitment advice. Our team also handles helmet communications installation and repair: choose the helmet for the driver’s head shape and discipline, then match the sunscreen and audio equipment to it.

Send the helmet model, generation and label details with a clear photograph of the existing sunscreen and hardware. Contact Aaron Harris on +64 27 449 9654. Check the exact helmet configuration and current category or event requirements where eye protection is specified.

Browse Bell helmet parts and accessories for other components, or Bell helmet visors for model-specific shield options. For broader selection advice, read the Bell Helmets buyer’s guide and Helmet Knowledge Centre.

Frequently asked questions

Which Bell helmets does this short sunscreen fit?

This is the M10 short adjustable sunscreen for selected HP10, HP10 Rally, Mag-10 Carbon, Mag-10 Pro, Mag-10 Rally Carbon, Mag-10 Rally Pro and Mag-10 Rally Sport applications. Confirm the exact helmet generation, sunscreen reference and mounting hardware before ordering.

Is this a protective shield or a replacement peak?

No. It reduces sun reflection and light transmission. It is not a protective shield, is not warranted shatterproof, and does not replace the helmet peak. The helmet shown in the product illustrations is not the sunscreen being sold.

Which colour options and part numbers are listed?

Light Smoke (2040141), Dark Smoke (2040142), Amber (2040143), Multi-Layer Red (2040144) and Mirror Blue (2040145). Select the colour variant before ordering.

Can I use a tinted or mirrored sunscreen at night?

Bell recommends tinted and mirror-coated sunscreens for daytime use only. Choose equipment appropriate to the visibility conditions and your event requirements.

How should I fit and adjust the sunscreen?

Use the Bell M10 sunscreen instructions for the exact peak, pivots, brake screws and washers. Do not overtighten or use thread lock. Check secure fit and smooth operation before use; ask Harris Race Radios™ for fitting assistance.

How should I clean it?

Clean the inner side only with a dry, soft microfibre cloth or shield pouch, with no liquids or chemicals. For the outer side, Bell specifies window cleaner or a Bell-specific product. Do not use brake cleaner, gasoline, fuel, solvents or other aggressive products.