2026 Can-Am Maverick X3 Complete Communication Kit | 696+ Bluetooth Intercom

2026 Can-Am Maverick X3 Complete Communication Kit configured for New Zealand and Australia with the Rugged Radios 696+ Bluetooth remote-head intercom, Rugged Radios CB RDM-DB two-way radio and 10.25-inch touchscreen model.

This is the NZ/AU-specific 2026 Can-Am X3 communications package. The radio configuration is important: for NZ and Australia, this kit is supplied with the Rugged Radios CB RDM-DB. The 696+ is the remote-head Bluetooth intercom used for this package.

2026 Can-Am X3 NZ/AU kit specification

• 2026 Can-Am Maverick X3 vehicle-specific communication kit
• Rugged Radios 696+ Bluetooth remote-head intercom
• Rugged Radios CB RDM-DB two-way radio for NZ and Australia
• 10.25-inch touchscreen model configuration
• Vehicle-specific mounting and installation components for the 2026 X3 package

What’s included

• 1 × Master Communication Kit
• 1 × Rugged Radios RRP696 PLUS remote-head intercom
• 1 × RDM-DB NZ/AU CB radio
• 2 × Intercom cables
• 1 × Driver PTT for the steering wheel
• 1 × Passenger PTT for the grab bar
• 1 × 15 ft antenna coax cable with 3/8 in NMO mount
• 1 × Long Range POINT5 antenna
• 1 × Active filter
• 1 × Radio/intercom mount

Not included: Helmet wiring kits and headsets are not included. Add them separately to complete your communication system.

Technical specifications

• Vehicle: 2026 Can-Am Maverick X3
• Display: 10.25-inch touchscreen model
• Radio: Rugged Radios CB RDM-DB two-way radio
• Intercom: Rugged Radios 696+ Bluetooth remote-head intercom
• Installation: Vehicle-specific communication-system installation
• Brand: Rugged Radios

Why the RDM-DB configuration matters

Radio availability and compliance requirements vary between markets. This Harris Race Radios NZ/AU version is configured around the Rugged Radios CB RDM-DB, the radio available for this package in New Zealand and Australia. It is not the same radio configuration shown on every overseas version of the 2026 Can-Am X3 kit.

Fitment

• Vehicle: 2026 Can-Am Maverick X3
• Intercom: Rugged Radios 696+ Bluetooth remote-head intercom
• Radio: Rugged Radios CB RDM-DB
• Display: 10.25-inch touchscreen model

Confirm your exact 2026 X3 model and package requirements before ordering. Do not assume that older Can-Am X3 communication kits, mounts or radio configurations are interchangeable with this model-year-specific package.

Installation guidance

Review the 2026 Can-Am X3 Installation Guide and watch the installation video before fitting the system. The installation is vehicle-specific, and the exact steps depend on the X3 model configuration and the equipment being installed. Confirm your fitment before ordering if you are unsure which communication-system components are required.

Rugged Radios authority and support

Harris Race Radios is the Exclusive Official Authorised Distributor and Dealer for Australasia for Rugged Radios. Our team can help confirm the 696+ intercom, RDM-DB radio, touchscreen and vehicle mounting requirements before you order.

Read our Rugged Radios offroad and motorsport communication systems guide, Rugged Radios Australia support page, and Expert Motorsport Advice for guidance from the Harris Race Radios team.

NZ and Australia supply

This kit is priced at NZ$3,099.00. NZ customers receive local product support, and shipping support is available for Australian customers subject to destination and freight options at checkout.

2026 Can-Am X3 installation video

Watch the 2026 Can-Am X3 remote-head intercom installation video before ordering or planning your vehicle setup:

Installation manual

Use the 2026 Can-Am X3 Installation Guide to review the vehicle-specific installation requirements before fitting the communication system. You can also browse the Rugged Radios instructions and user manuals library.

Related 2026 Can-Am X3 equipment

• 2026 Can-Am X3 Radio and Remote Head Intercom Mount — the separate 2026 vehicle-specific mount
• Can-Am X3 Side Panels for Rugged Multi Mount Install Dash — related X3 installation hardware
• Browse Can-Am communication kits, intercoms and radio mounts
• Browse offroad, UTV and 4WD communication equipment

Harris Race Radios expertise

Rex Harris is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for New Zealand RSM and Australia ACMA, with motorsport radio experience since 1975 beginning at the Marlboro Series Grand Prix.

Aaron Harris is an active racing driver and race engineer, a Barcelona 24 Hour 1st in Class competitor, Bathurst 1000 and 12 Hour competitor, BMW Race Driver Series Champion, and race engineer for Earl Bamber Motorsport, TekworkX, Matt Stone Racing and Porsche Carrera Cup Australia, Asia-Pacific and New Zealand.

Frequently asked questions

Which intercom is supplied with this 2026 Can-Am X3 kit?

This NZ/AU configuration uses the Rugged Radios 696+ Bluetooth remote-head intercom.

Which radio is supplied in New Zealand and Australia?

The NZ/AU configuration uses the Rugged Radios CB RDM-DB two-way radio.

Does this kit include helmet wiring kits or headsets?

No. Helmet wiring kits and headsets are not included and must be added separately to complete the communication system.

Does this kit include the 10.25-inch touchscreen model?

Yes. This listing is for the 10.25-inch touchscreen model configuration of the 2026 Can-Am Maverick X3 communication kit.

Where can I find the installation instructions?

The installation guide is linked above, and the installation video shows the 2026 Can-Am X3 remote-head intercom installation.

Will this fit an older Can-Am Maverick X3?

Do not assume older X3 fitment. This is a 2026-specific communication package, so confirm your vehicle model and year before ordering.

Can you ship the kit to Australia?

Yes, shipping support is available for Australian customers, subject to destination and freight options at checkout.