Pyrotect ProRace SFA SA2025 Helmet | Communications Options

Choose your helmet communications

1. No Comms: bare helmet

No fitted speakers, microphone or communications lead. Choose this option when you want the helmet without added audio.

2. 3.5 mm Receive-Only: one-way receiver audio

Fitted helmet speakers with a 3.5 mm receiver connection for compatible speedway and other one-way race-control receivers. This option is listening only: it does not include a microphone or two-way talk-back. Match mono/stereo wiring to the exact receiver; a 3.5 mm plug alone does not guarantee compatibility.

Component example shown, not a photograph of the fitted installation. We select the speaker configuration and wiring for your receiver.

3. Full Two-Way Comms: radio and intercom audio

Fitted microphone, speakers and communications lead matched to a suitable two-way radio or intercom, including off-road driver/co-driver and crew systems. Confirm the radio or intercom model, microphone requirements, pinout and connector before fitting.

PCI-wired ProRace SFA shown with its fitted communications lead. The supplied kit and connector are matched to your radio or intercom; confirm the selected configuration before ordering.

These choices configure the helmet audio. A receiver, two-way radio, vehicle intercom, pumper and connecting vehicle equipment are not included. Correct fit and permitted communications for your class remain essential.

The Pyrotect ProRace SFA SA2025 is a composite full-face side-forced-air helmet with three separately priced communications choices. No Comms is unwired; receiver speakers provide receive-only audio; full off-road comms is a separate fitted option. Not every variant is pre-wired.

Specifications

Choose audio for the job

The speaker option uses a 3.5 mm stereo receiver connector and is not a full microphone/intercom kit. Full Offroad Comms requires matching the actual plug, pinout and microphone to the intercom. PCI and Rugged connections are not universally interchangeable. Photos showing a communications lead illustrate a fitted option, not the contents of No Comms.

In speedway, clear reception of NZ one-way race-control instructions or Australia’s Race Management Channel can help drivers respond to incidents where those systems are required. Off-road crews benefit from driver/co-driver coordination and early warnings about vehicle problems, helping protect equipment as well as improving operations. Confirm the permitted system for your class.

Size and fit

Measure above the eyebrows and ears. Use the manufacturer chart as a starting point, then check head shape, crown pressure, cheek support and stability with your balaclava and equipment. Do not automatically size up or rely on extra padding to make an unsuitable shell fit.

NZ and Australian competition requirements

Snell SA2025 is the current Snell motorsport standard. Check the physical certification label, condition and current discipline, category and event rules with the organiser. Helmet style, communications and FHR requirements are separate checks; an SA2025 label does not override a full-face requirement. M6 inserts need the correct manufacturer-approved posts, compatible FHR device and tethers.

Helmet matching and communications expertise

Harris Race Radios™ is a Pyrotect dealer for New Zealand and Australia and sources Pyrotect helmets directly. We maintain a broad helmet range to match discipline, head shape, fit, budget and communications needs rather than forcing an unsuitable helmet to fit.

Aaron Harris brings professional race-engineering experience, Bathurst 1000 and 12 Hour competition and a Barcelona 24 Hour class win to practical fitting and installation advice. He is a MotorSport NZ Licence Examiner for licences. Rex Harris is a degree-qualified radio electronics engineer, RSM Approved Radio Engineer ARE127 and Approved Radio Certifier ARC127, with motorsport radio experience since 1975. We can arrange Australian ACMA radio licences.

For fitting, engineering, installation, connector checks or repairs contact Aaron on +64 27 449 9654 or aaron@harriscomms.co.nz. Confirm size availability and NZ/AU delivery.

Range and advice

Shop the Pyrotect helmet range, compare Pyrotect models, read our helmet fitting guide and review helmet standards and category guidance.

Frequently asked questions

Does every variant come wired?

Choose one of three configurations: No Comms for the bare helmet without fitted communications; 3.5 mm Receive-Only for helmet speakers and a receiver lead for compatible one-way systems; or Full Two-Way Comms for microphone, speakers and a matched radio/intercom connection. Confirm the exact equipment and connector before fitting. Radios, receivers and vehicle intercoms are not included.

Is a pumper included?

This listing is for the selected helmet configuration. A compatible clean-air pumper, hose and connector are selected separately.

What certification is specified?

Snell SA2025. Check the physical label and current category requirements. No additional SFI rating is claimed here.

Will it work with my PCI or Rugged intercom?

Confirm the actual plug, pinout and microphone requirements. A brand name alone does not establish compatibility.

Does SA2025 guarantee event acceptance?

No. Confirm the physical helmet label, style, condition and current discipline, category and event requirements with the organiser.