AiM MXS Strada Dash (No Logging) 1.2 With Icons 5"

MXS Strada is the evolution of MXL Strada, one of the most widely used dashcams on tracks and streets all over the world. MXS Strada is a 5" colour display with great visual impact, configurable to show lap times and all the information coming from the Engine Control Unit, analogue/digital inputs, pre-defined maths channels and, optionally, the GPS Module. The AiM MXS Strada Dash is the evolution of the MXL Strada, one of the most widely used dashes on tracks and streets all over the world. MXS Strada is a 5" colour display with great visual impact, configurable to show lap times and all the information coming from the Engine Control Unit, analogue/digital inputs, predefined math channels and - optionally - the GPS Module.

Its data sampling capability can also be incremented adding up to eight expansion modules.

The AIM MXS Strada Dash is a high-contrast TFT display. Its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels. This version of the dash includes the 'Street Icons' needed by street users (fuel, oil, water temperature, etc.). MXS Strada is also available in a version without icons. Please refer to MXS Strada Standard separately. MXS Strada shows, together with the RPM scale, all the data you need, such as speed, water temperature, and oil pressure, lap times, and much more...

You can choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the push buttons.

Comes with 14 pin standard harness

A wide range of data sources

The AiM MXS 1.2 Strada Dash, the evolution of the MXS Strada, is a 5-inch colour display with great visual impact. It is configurable to show lap times and all the information coming from the Engine Control Unit, analogue/digital inputs, pre-defined math channels and, optionally, the GPS08 Module.

CAN output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

High contrast TFT display

The MXS Strada 1.2 features a high-contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels. This version of the dash includes the 'Street Icons' needed by street users (fuel, oil, water temperature, etc.). The MXS Strada is also available in a version without icons. Please refer to the MXS Strada Standard separately.

Watch your data in pre-configured pages

The MXS 1.2 Strada displays, together with an RPM scale, all the data you need, such as speed, water temperature, and oil pressure, lap times, and much more. You can choose the custom pages from a wide library of page styles, defining which data to be shown, their end-of-scale, and measure units. Swapping between pages is quite easy using the pushbuttons.

Flexible alarms

The ten multicoloured RGB shift lights can be customised as you like, defining the RPM threshold for each individual gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on or off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You can choose the conditions and colours: select a solid alarm or flashing one, as well as the flashing frequency. It is also possible to configure an accompanying text message and set the alarm priorities.

Two digital outputs

The MXS 1.2 Strada features a LOW SIDE type (switch to ground) digital output that can be configured to be activated or deactivated depending on the value of the analogue or digital inputs, or on impulses coming from the ECU. This allows external systems to be automatically run, such as switching on or off additional lights, activating or deactivating a cooling fan or circulation pumps, when a certain event occurs.

A modular system

Using the built-in CAN bus, you can add expansion modules to visualise additional information.

- GPS08 Module

- Channel Expansion

- TC Hub

- LCU-One CAN

- SmartyCAM HD cameras

Race Studio 3 configuration

The AiM MXS 1.2 Strada Dash is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, math channels, display pages, digital output, alarms, shift lights and all the expansions you need.

More Info

+1,000 industry-leading ECUs GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCAM HD Anodised Aluminium

Display	5" TFT
Resolution	800x480 pixels
Contrast	600:1
Brightness	700cd/m2 - 1,100 Lumen
Ambient light sensor	Yes
Alarm LEDs	6 RGB freely configurable
Shift Lights	10 integrated freely configurable RGB LEDs
CAN connections	2
ECU connections	CAN, RS232 or K-Line
ECU compatibility
Expansion CAN connection
Analog inputs	8 fully configurable, max 1,000 Hz each
Digital inputs	1 speed input, coil RPM input
Digital outputs	1 (1A max)
Second CAN	Yes
Body
Pushbuttons	Metallic
Connectors	2 AMP connectors
Power consumption	400 mA
Dimensions	169.4 x 97 x 23 mm
Weight	480 g
Waterproof	IP65