Your Cart
Harris Race Radios Shop > AiM Sport > AiM Car Systems > AiM Solo2 Car GPS Lap Timers > Track Day Suction Mount For Smartycam HD And Solo 2 (Not Included)

AiM Double Bracket Trackday Kit allows you to fit AiM Smartycam HD 2.1 & AiM Solo 2 DL


GPS Lap Timer & Data Logger

AiM Solo 2 DL the most precise and simple way to get lap times with ECU data and overlay it all with your SmartyCam video as well.

Key Features:


  • Connectable to every ECU for receiving and recording Data
  • 10 configurable RGB LEDs for simple Time +/- reference
  • Rechargeable internal battery
  • Multiple use Modes: Speed, Times & Performance
  • WIFI with security for downloading data
  • Internal 4 GB memory
  • Automatic GPS lap timer
  • Simple new open or closed track creation
  • Configurable delta and split times
  • Multiple & configurable backlit graphical display
  • Database, with more than 4,000 tracks worldwide
  • Freely configurable display
  • Automatic track recognition and start / stop
  • Free Race Studio 3 Download


SmartyCam HD Rev 2.1 Competitive Advantages

Key Features:


  • Real time data overplayed on video
  • Proprietary lenses designed for motorsport
  • Race Studio 3 for video configurations & analysis
  • Front mount coloraturas TFT display for in-car installation
  • Automatic start & stop
  • High-quality small size video files
  • No “wave effect” with the CMOS sensor and improved video quality
  • Designed to withstand extreme on-track working conditions
  • Compact, handy and easy to install

The Solo 2 DL  + SmartyCam HD Rev 2.1 Track Day Kit

Aim Solo 2 DL Car Video Data Logger Track Day Kit is a powerful data recording combination of the Solo 2 DL and SmartyCam HD Rev .2.1 Camera.

Solo 2 DL connects to your ECU which will provide you with ECU and GPS data. SmartyCam HD records your on board video and audio.

AiM SmartyCam HD overlays all the data you need from different sources, track map and vehicle position as well as speed and lap times as well as speed, lap and split times.


Incase your ECU protocol is not in the database no problem: with our ECU Driver Builder you can build your own its free in Race Studio 3 configuration software and you will be able to create your protocol on your own.
Coil RPM Input

Solo 2 DL now also features a digital input allowing you to log RPM either from square wave signals (8-50V each signal) or a pulse signals (150-450v) ignition coli trigger-primary circuit.

Multiple Configurations Management

Solo 2 DL can receive up to 10 configurations at one time allowing you to switch among them through keys.

The Most Precise and Easy Way to get Lap Times

AiM Solo 2 DL is the most precise GPS lap timer there is with the ability to show you your lap delta live as you drive… receiving data from two satellite constellations from any where on the globe by using GPS and Glonass also giving you a significant improvement in data speed and positioning precision.

Powering on requires only a few seconds and lap times are calculated with a max 2/100 sec of tolerance.

Solo 2 DL gives instant Speed, Timing, Splits live data and predictive lap times.

The Solo 2 DL screen can be back lit in one of the seven available colours:



Predictive Lap Timer

The AiM Solo 2 DL has 10 configurable RGB LEDs and will give you a clear and fast indication of the comparison with your last lap. Predictive page: shows the predicted current lap time in the format you set.

+/- in relation to the Reference Lap Predicted Lap Time

You can custom build the layout of the display to show the information you choose on 4 reconfigurable pages your data shown in your way see an example below.



Solo 2 DL Data Recall Modes

Solo 2 DL can manage two types of data or races:

In each of these configurations Solo 2 DL gives the complete information during the test with the data ready to view on the Solo 2 DL or Race Studio 3 analysis software immediately after each race or test session.

Data Recall on Screen Data

At the end of your test you can quickly review all the key information on your display, RPM, Temps Times ECT.

SmartyCam HD Connection

The SmartyCam HD 2.1 has been designed for motorsports with the purpose of providing great videos that will include all your technical information that will help you improve your driving performance. Get overlays for all your data from GPS i.e ROM, engaged gear, acceleration, temperatures, pressures. All of this information will be overplayed on videos in each single point of the track.

Not enough add a Data Hub

The Data Hub is a CAN connection multiplier that works as an interface between all of our AiM loggers. The Data Hub takes all your information to the logger with only one cable.


Why people love our products

High-quality, ethically sourced products at affordable prices

Be the first to leave a review.

There are no reviews yet.

AiM Bracket for mounting AiM Solo2 and AiM Smartycam

Only logged in customers who have purchased this product may leave a review.