The Hiprema 4 from Prisma Electronics is a professional car racing and karting digital tyre pressure gauge. With a built in stopwatch, designed for Motorsports use in both 2 and 4 wheels in NZ and Au. Automatic calibration provides accurate pressure measurements, every time, which can be stored in the units built in memory.

• Developed for Motorsport use
• 0-5 Bar / 72 psi pressure range (Switchable between Bar and Psi)
• 4 driver / rider stopwatch with 9 split times for each
• Car or bike modes
• Reliable and accurate readings time after time (accurate to less than 0.1%)
• Display shows hot and cold pressures and the pressure difference
• Save pressures, time, date and ambient temperature to the internal memory

The Hiprema 4 digital tyre pressure gauge has 2 function modes:
Normal mode – Allows pressures to be measured and adjusted without saving them.
Memory mode – Saves both hot and cold pressures in sequence including the pressure differences. This information can also be displayed at the same time along with time, date and ambient temperature. the memory has enough capacity to save up to 50 sessions

Prema Professional car racing and karting digital tyre pressure gauge with built in stopwatch.

The Hiprema 4 has an auto calibration function every time the device is switched on so you can be sure of maximum accuracy time after time. The display is backlit and features an ambient light sensor to adjust the screen brightness accordingly for optimum viewing. A pressure shoot function automatically saves hot tyre pressures.

The stopwatch function can be activated with a simple push of a button and allows timing of up to 4 drivers / riders with up to 9 split times for each. the difference between the current and best lap times are also displayed.

Technical features: Pressure range 0-5bar (0-72 psi), Accuracy less than 0.1%, Water / dust resistant to IP55,

Information sheets for Hiprema 4 digital tyre pressure gauge / logger with stopwatch