Harris Race Radios

NZ and AU leading supplier of Motorsports Communications

0
Your Cart

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

This camera offers a couple of interesting options:
• the possibility to reverse the image
• the possibility to enable or disable the parking overlay view.

Compatible with: MXS 1.2, MXP, MXG 1.2, MXS 1.2 Strada, MXP Strada, MXG 1.2 Strada

Single RearMaster camera (cable length: 5m) ended with:
o Male metallic 5pins Binder connector for connection to AiM loggers;
o DC Power Connector (yellow) to be connected to the camera one;
o Video RCA Connector (red) to be connected to the camera one.
• Double RearMaster camera (cable length: 6m) ended with:
o Male metallic 5pins Binder connector for connection to AiM loggers;
o X2 DC Power Connector (yellow)* to be connected to the camera one;
o X2 Video RCA Connector (red)* to be connected to the camera one.
*
The two DC Power and Video RCA cables couples are respectively 4m and
6m long, in order to allow both front camera and rear camera connection.

Physical Connection

The Aim loggers built to manage rear
cameras are provided with a female metallic 5 pins Binder connector,
placed on the device bottom and labelled as “VIDEO IN” (following
image).

Reversing Camera connection

Physical Connection pinout

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

  • This camera offers a couple of interesting options:he possibility to reverse the image
  • The possibility to enable or disable the parking overlay view

Please
Note: some analog cameras require a 3.3V power. Please, verify before
you connect yours to the +Vb output (12V), supplied by the pin3 of the
Binder connector .

It has, as most of the analog cameras,
a connection through standard RCA connectors (following right image),
for which we have developed the patch cables:

Physical connection

Single RearMaster camera (cable length: 5m) ended with:

  • Male metallic 5 pins Binder connector for connection to Aim loggers
  • DC Power Connector (yellow) to be connected to the camera one;
  • Video RCA Connector (red) to be connected to the camera one.
Single RearMaster cameraSingle RearMaster camera

Double RearMaster camera (cable length: 6m) ended with

  • Male metallic 5pins Binder connector for connection to AiM loggers
  • X2 DC Power Connector (yellow)* to be connected to the camera one
  • X2 Video RCA Connector (red)* to be connected to the camera one.

*
The two DC Power and Video RCA cables couples are respectively 4m and
6m long, in order to allow both front camera and rear camera connection

Aim
offers the same camera with a more reliable Binder connection (Part no.
XB1ZCAMHD00; Binder conector pinouts are specified below):

more reliable Binder

more reliable Binder 2

Binder pinouts

The patch cables available are:

Single Aim Mirror Camera (6m length) ended with

  • Male metallic 5pins Binder connector for connection to AiM loggers
  • Female metallic 5pins Binder connector for Mirror Camera connection.
Single Aim Mirror CameraSingle Aim Mirror Camera

Double Aim Mirror Camera: ended with:

  • Male metallic 5pins Binder connector for connection to AiM loggers
  • X2
    female metallic Binder connectors: each one must be used to connect the
    Mirror Camera (cable lengths 4m – front camera – and 6m – rear camera).
Double Aim Mirror Camera

Configuration through Race Studio 3

Once
the connection has been executed, it is necessary to configure the
device, defining a specific event that causes the camera image
displaying. For example, if you wish to turn ON the camera when you
insert the Reverse Gear, these are the steps to follow:

  • Open Race Studio 3, connect your system via Wi-Fi or USB and create a new configuration (or modify an existing one).
  • The Gear, of course, is supposed to be one of the available channels. It is possible to obtain it

Through
analog sensor, plugging it into one of the device analog channels,
which must be configured as expressed on the right (Channels tab). The
“Use reverse gear” box must be ticked.

Through analog sensor

Through ECU, selecting the compatible protocol with your vehicle ECU from the ECU Stream tab.

Through ECU

Open
the Trigger Commands tab and click “Add New Command”: select “First
Camera Input Page” as a command to activate when the Gear is equal to
“R”.

Trigger Commands

Settings through Aim device menu

The camera parameters setting must be executed from the device menu directly, as explained below:

  • Press “MENU/<<” button.
  • Pressing “PREV and “NEXT”, move on the VIDEO IN icon and press “ENTER”.
  • The
    system offers the possibility to set the image format (PAL or NTSC –
    according to the camera technical specs), brightness and contrast for
    each available input.
camera parameterscamera parameters

If
no key is pressed, after 5 seconds the menu disappears, showing the
camera image in live streaming, so that it can be better positioned.

camera parameters no key is pressed

Why should you join our email list?

  1. Access our email only sales!
  2. Helpful monthly emails with event info & product updates
  3. Access limited stock product first
  4. You can leave at any time!

Processing…
Success! You're on the list.

Reviews

There are no reviews yet.

Be the first to review “AiM Mirror/Reversing Camera For MX 1.2 Series”

Your email address will not be published. Required fields are marked *

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information: