AiM MXT 1.3 Strada 10" TFT Digital Display with Race or Road Icons

The AIM MXT 1.3 Strada is a 10-inch TFT digital dashboard display tailored for automotive enthusiasts who seek high performance. Its main features encompass a high-resolution screen, customisable layouts, and compatibility with data from the vehicle's ECU as well as external sensors. It also provides street or road icons. AiM MXt 1.3 Strada 10" TFT Dash Display with Race or Road Icons The AiM MXT 1.3 Strada boasts a 10-inch wide color digital dash display that provides significant visual impact and can be configured to display data from your vehicle's ECU. In optional Motorsport or street icon display. Key Features :

• - 10" TFT display
• - 6 alarm RGB LEDs
• - 10 shift light RGB LEDs
• - 8 analogue inputs
• - CAN output
• - Configure data

Aim Max 1.3 Strada 10" TFT Dash Display with Race Icons

 

Aiming to maximise 1.3 Strada 10" TFT Dash Display with Road Icons. The MXT 1.3 Strada comes equipped with a built-in shift sequence indicator, customizable color-coded alerts, an intuitive multi-page setup via drag-and-drop. Both Wi-Fi and USB options. For connectivity, a GPS09 module, a variety of analog and digital inputs. Outputs fit for motorsport applications, robust 4GB onboard storage, high-resolution 1000Hz sampling for each channel. And compatibility with over 1000 different ECU models. It captures information from multiple sources including your vehicle's ECU, the GPS09 module. Eight adaptable analog inputs, six digital inputs, pre-programmed math channels, and an auxiliary CAN network. Performance and data acquired can also be incremented adding up to eight expansion modules.

Freely Configurable Pages

You can define up to 8 custom pages, choosing among a selection of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two pushbuttons.

---

Display

A high-contrast 10" TFT display identifies MXT 1.3 Strada at first glance. An ambient light sensor keeps the backlight at optimum brightness levels.

---

Flexible Alarms and Custom Street Icons

MXT 1.3 features five configurable RGB alarm LEDs: you choose the conditions, and you choose the colours. Select a solid alarm or flashing one - and the flashing frequency. Choose to have an accompanying text message, and set the alarm priorities. Furthermore, you can have the option of  the street icons or race. You need from the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer, or according to your needs. You will also be able to upload and set up your own customised icons.

---

Two Digital Outputs

MXT 1.3 Strada features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground). They can be configured to be turned on/off depending on the value of the analogue or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights. To activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

---

Camera Inputs and Mirror Camera

Two analogue camera inputs are available to swap your display into a mirror camera, through a pushbutton command or event management.

---

Integrated Shift Light Array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like, and for each unique gear when required.

---

Expand Your System

Using the built-in CAN bus, you can add expansion modules to the MXT 1.3 Strada to increment the performance and the data acquired: GPS09 Module Thanks to GPS09 Module (included in the kit) and its Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique. Channel Expansion It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. TC Hub It adds 4 K thermocouples. LCU-One CAN Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. Memory Module The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM Strada logger in order to record the data during your tests. Other AiM display dashes avalable MXS, MXS 1.3

---

Connection Example

These are only some of the items that can be added to our MXT 1.3 Strada for incrementing the performance and the data acquired:

---

Configure and Analyse With Race Studio 3

Configuration allows you to create, modify, delete, import, and export configurations in Race Studio 3. Including all channels, ECU drivers, math channels, display pages, digital outputs, alarms, shift lights, and any necessary expansions. You can manage your racing track maps and compare two laps with videos recorded by SmartyCam HD cameras. Analysis in Race Studio 3 enables you to examine all data recorded by the MXP 1.3 Strada and downloaded to your PC. Using graphs, histograms, and tables to study your performance. Thud offering objective support to avoid errors and enhance performance.