{"product_id":"maglock-helmet-adapters-roux-stilo","title":"MagLock Helmet Adapters for Roux by Pininfarina \u0026 Stilo","description":"\u003ch2\u003eMagLock Helmet Adapters — Designed by Harris Race Radios for Roux by Pininfarina \u0026amp; Stilo\u003c\/h2\u003e\n\u003cp\u003eAs one of the first specialists in Australasia to adopt the \u003ca href=\"\/products\/bell-maglock-forced-air-helmet-connection-2\"\u003eMagLock forced air helmet connection system\u003c\/a\u003e, Harris Race Radios identified a critical compatibility problem: the standard 1.5\" round fitment used by most MagLock systems is not compatible with the proprietary air fittings on Roux by Pininfarina and Stilo helmets. The result is a poor seal, reduced airflow, and a frustrating installation experience.\u003c\/p\u003e\n\u003cp\u003eTo solve this, Harris Race Radios designed and developed our own range of \u003cstrong\u003eMagLock helmet adapters\u003c\/strong\u003e — precision-engineered to bridge the gap between the MagLock system and the specific air inlet geometry of \u003cstrong\u003eRoux by Pininfarina and Stilo\u003c\/strong\u003e helmets. Each adapter also incorporates a \u003cstrong\u003e30-degree angle\u003c\/strong\u003e to provide greater flexibility in hose routing direction — reducing strain on the connection and improving fitment in tight cockpit environments.\u003c\/p\u003e\n\n\u003ch2\u003eWhy You Need a Helmet-Specific MagLock Adapter\u003c\/h2\u003e\n\u003cp\u003eNot all helmet air fittings are created equal. Using a generic 1.5\" MagLock connection on an incompatible helmet inlet can result in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir leaks at the connection point — reducing cooling effectiveness\u003c\/li\u003e\n\u003cli\u003eDifficulty seating and releasing the MagLock under race conditions\u003c\/li\u003e\n\u003cli\u003ePotential damage to the helmet's air inlet fitting\u003c\/li\u003e\n\u003cli\u003eUnreliable forced air delivery during critical race moments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur adapters ensure a secure, airtight connection between your MagLock system and your helmet — so your forced air cooling works exactly as intended, every time.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelmet-specific fitment\u003c\/strong\u003e — designed for Roux by Pininfarina and Stilo helmet air inlet geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-degree angled design\u003c\/strong\u003e — greater flexibility in hose routing direction for tight cockpit installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure MagLock connection\u003c\/strong\u003e — ensures airtight seal between MagLock system and helmet inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and developed by Harris Race Radios\u003c\/strong\u003e — born from real-world experience fitting MagLock systems across NZ and AU motorsport\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatible with standard MagLock forced air systems\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Helmets\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRoux by Pininfarina helmets — forced air compatible models\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/pages\/stilo-st5-helmet-range\"\u003eStilo helmets\u003c\/a\u003e — ST5, ST6, and other Stilo forced air models (adapter code \u003cstrong\u003eHEL-MAG-AD-2\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHarris Race Radios — NZ \u0026amp; AU's Most Experienced Motorsport Safety Specialists\u003c\/h2\u003e\n\u003cp\u003eHarris Race Radios is NZ and Australia's most experienced motorsport safety and communications specialist. These MagLock adapters were developed in-house by our team after identifying the compatibility gap firsthand while fitting forced air systems for competitors across NZ and AU motorsport.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRex Harris\u003c\/strong\u003e is a qualified Radio Telecommunications Engineer and Approved Radio Certifier for NZ RSM and AU ACMA, with motorsport involvement since 1975 at the Marlboro Series Grand Prix.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAaron Harris\u003c\/strong\u003e is an active racing driver and race engineer — Barcelona 24 Hour 1st in class (2013), Bathurst 1000 and 12 Hour competitor, BMW Race Driver Series Champion (2011), and race engineer for Earl Bamber Motorsport, TekworkX, Matt Stone Racing, and Porsche Carrera Cup Australia\/Asia-Pacific\/NZ. Aaron is also an MSNZ Licence Examiner.\u003c\/p\u003e\n\n\u003cp\u003e📞 Aaron Harris: \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e | \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eNZ-designed and developed by Harris Race Radios\u003c\/li\u003e\n\u003cli\u003eNZ stock held locally for fast dispatch — ships to Australia\u003c\/li\u003e\n\u003cli\u003eExpert fitment advice available — contact Aaron Harris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhich helmets are these adapters compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThese adapters are designed for Roux by Pininfarina and Stilo helmets with forced air inlets (Stilo adapter code HEL-MAG-AD-2). Contact Aaron Harris to confirm compatibility with your specific helmet model.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy do I need a helmet-specific adapter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe standard 1.5\" round MagLock fitment is not compatible with the proprietary air inlet geometry of Roux by Pininfarina and Stilo helmets. Without the correct adapter, you risk air leaks, poor cooling performance, and potential damage to your helmet's air fitting.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the 30-degree angle for?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe 30-degree angled design provides greater flexibility in hose routing direction — particularly useful in tight cockpit environments where a straight connection would create strain on the hose or fitting.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWill this work with my existing MagLock forced air system?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes — these adapters are designed to work with standard MagLock forced air systems. Contact us to confirm compatibility with your specific setup.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs NZ and AU stock available?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes — Harris Race Radios holds NZ stock for fast local dispatch and ships directly to Australia.\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"Which helmets are these adapters compatible with?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These adapters are designed for Roux by Pininfarina and Stilo helmets with forced air inlets (Stilo adapter code HEL-MAG-AD-2). Contact Aaron Harris to confirm compatibility with your specific helmet model.\"}},\n    {\"@type\": \"Question\", \"name\": \"Why do I need a helmet-specific adapter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The standard 1.5\\\" round MagLock fitment is not compatible with the proprietary air inlet geometry of Roux by Pininfarina and Stilo helmets. Without the correct adapter, you risk air leaks, poor cooling performance, and potential damage to your helmet's air fitting.\"}},\n    {\"@type\": \"Question\", \"name\": \"What is the 30-degree angle for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 30-degree angled design provides greater flexibility in hose routing direction — particularly useful in tight cockpit environments where a straight connection would create strain on the hose or fitting.\"}},\n    {\"@type\": \"Question\", \"name\": \"Will this work with my existing MagLock forced air system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — these adapters are designed to work with standard MagLock forced air systems. Contact us to confirm compatibility with your specific setup.\"}},\n    {\"@type\": \"Question\", \"name\": \"Is NZ and AU stock available?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — Harris Race Radios holds NZ stock for fast local dispatch and ships directly to Australia.\"}}\n  ]\n}\n\u003c\/script\u003e\n\u003ch2\u003eRelated Maglock Resources\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/harrisraceradios.com\/blogs\/harris-race-radios-posts\/maglock-helmet-compatibility-guide\"\u003eMaglock Helmet Compatibility Guide — which helmets need an adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/harrisraceradios.com\/blogs\/harris-race-radios-posts\/what-is-maglock-the-complete-guide-to-racing-helmet-air-systems\"\u003eWhat is Maglock?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/harrisraceradios.com\/collections\/maglock-helmet-air-coupling\"\u003eShop Maglock Helmet Air Coupling Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Harris Race Radios","offers":[{"title":"for Roux by Pininfarina","offer_id":46095437496539,"sku":"HEL-MAG-AD-1","price":119.0,"currency_code":"NZD","in_stock":true},{"title":"for Stilo","offer_id":46095437529307,"sku":"HEL-MAG-AD-2","price":319.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/Maglock_Roux.png?v=1787269747","url":"https:\/\/harrisraceradios.com\/products\/maglock-helmet-adapters-roux-stilo","provider":"Harris Race Radios","version":"1.0","type":"link"}