{"title":"Helmet Dirt \u0026 Dust Skirts","description":"\u003cp\u003eFind helmet dirt skirts, dust skirts and replacement attachment accessories from PCI, Impact, Rugged Radios, Roux, MRC and Stilo at Harris Race Radios™. Compare skirt options for your existing helmet and motorsport setup in New Zealand or Australia, without searching through complete helmets and unrelated accessories.\u003c\/p\u003e\u003ch2\u003eChoose the skirt for your helmet\u003c\/h2\u003e\u003cp\u003eStart with your exact helmet brand and model, then check the individual product's stated fitment, attachment method and supplied components. Do not assume every skirt fits every helmet from the same brand. This range includes Stilo ST5\/ST6 and Venti WRX skirts, offroad dust-skirt options and a Rugged Radios replacement Velcro strip. The replacement strip is an attachment accessory, not a complete skirt.\u003c\/p\u003e\u003ch2\u003eMaterials, installation and racing application\u003c\/h2\u003e\u003cp\u003eThe PCI, PCI two-layer Nomex, Rugged Radios, Roux Rugged and MRC skirts in this range are SFI 3.3\/5 approved. The Impact and Stilo ST5\/ST6 and Venti WRX skirts are SFI 3.3\/10 approved. The replacement Velcro strip is an attachment accessory and carries no skirt certification claim.\u003c\/p\u003e\u003cp\u003eCheck the materials and physical certification label on the exact product. Follow the helmet and skirt manufacturers' installation instructions and check your discipline and event requirements for the intended equipment combination.\u003c\/p\u003e\u003ch2\u003ePractical helmet-system advice\u003c\/h2\u003e\u003cp\u003eConsider your communications wiring, air hose and head-and-neck restraint when selecting and fitting a skirt. Harris Race Radios™ brings motorsport communications and race-engineering experience to helping you match the accessory to your helmet setup. Contact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your helmet model and application.\u003c\/p\u003e\u003ch2\u003eCompare helmet skirt options\u003c\/h2\u003e\u003cp\u003eCompare the \u003ca href=\"\/products\/pci-racing-helmet-skirt\"\u003ePCI Racing Helmet Skirt\u003c\/a\u003e, \u003ca href=\"\/products\/pci-racing-2-layer-nomex-helmet-skirt\"\u003ePCI two-layer Nomex skirt\u003c\/a\u003e and \u003ca href=\"\/products\/impact-velcro-race-helmet-dust-skirt\"\u003eImpact Velcro RACE skirt\u003c\/a\u003e by their exact construction, attachment system and product specification.\u003c\/p\u003e\u003cp\u003eFor offroad dust-skirt options, see the \u003ca href=\"\/products\/rugged-radios-velcro-helmet-skirt\"\u003eRugged Radios skirt\u003c\/a\u003e, \u003ca href=\"\/products\/roux-rugged-velcro-race-helmet-dust-skirt\"\u003eRoux Rugged skirt\u003c\/a\u003e and \u003ca href=\"\/products\/mrc-helmet-replacement-dust-skirt\"\u003eMRC replacement skirt\u003c\/a\u003e. Check individual helmet fitment before ordering.\u003c\/p\u003e\u003cp\u003eMatch the \u003ca href=\"\/products\/stilo-sfi-st5-st6-helmet-skirt\"\u003eStilo ST5\/ST6 skirt\u003c\/a\u003e and \u003ca href=\"\/products\/stilo-sfi-venti-wrx-skirt\"\u003eStilo Venti WRX skirt\u003c\/a\u003e to the correct model. For attachment repairs, check the Rugged Radios replacement Velcro strip, which is not a complete skirt.\u003c\/p\u003e\u003ch2\u003eRelated helmet equipment\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/speedway-dirt-offroad-helmets\"\u003eSpeedway, dirt and offroad helmets\u003c\/a\u003e, \u003ca href=\"\/collections\/stilo-accessories\"\u003eStilo helmet accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/all-helmet-accessories\"\u003eAll Helmet Accessories\u003c\/a\u003e. For air-hose connections, compare \u003ca href=\"\/collections\/maglock-helmet-air-coupling\"\u003ehelmet cooling and forced-air components\u003c\/a\u003e and read the \u003ca href=\"\/blogs\/harris-race-radios-posts\/maglock-helmet-compatibility-guide\"\u003eMaglock helmet compatibility guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eAre dirt skirts and dust skirts different categories?\u003c\/h3\u003e\u003cp\u003eBoth terms are used when shopping for helmet skirts. Select by the exact product's construction, intended application and fitment rather than its name alone.\u003c\/p\u003e\u003ch3\u003eWill any skirt fit my helmet?\u003c\/h3\u003e\u003cp\u003eDo not assume universal fitment. Check the product details and attachment system against your exact helmet model before ordering.\u003c\/p\u003e\u003ch3\u003eIs the replacement Velcro strip a complete skirt?\u003c\/h3\u003e\u003cp\u003eNo. The Rugged Radios replacement Velcro strip is a related attachment accessory. A complete skirt must be selected separately if required.\u003c\/p\u003e\u003ch3\u003eHow do I choose between brands?\u003c\/h3\u003e\u003cp\u003eUse helmet compatibility first, then compare attachment systems, materials and the stated product specification for your application. Ask our team if your helmet setup is not clearly covered.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Are dirt skirts and dust skirts different categories?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both terms are used when shopping for helmet skirts. Select by the exact product's construction, intended application and fitment rather than its name alone.\"}},{\"@type\":\"Question\",\"name\":\"Will any skirt fit my helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Do not assume universal fitment. Check the product details and attachment system against your exact helmet model before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Is the replacement Velcro strip a complete skirt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The Rugged Radios replacement Velcro strip is a related attachment accessory. A complete skirt must be selected separately if required.\"}},{\"@type\":\"Question\",\"name\":\"How do I choose between brands?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Use helmet compatibility first, then compare attachment systems, materials and the stated product specification for your application. Ask our team if your helmet setup is not clearly covered.\"}}]}\u003c\/script\u003e","products":[{"product_id":"rugged-radios-velcro-helmet-skirt","title":"Rugged Radios Velcro RACE Helmet Dust Skirt","description":"\u003cp\u003eThe \u003cstrong\u003eRugged Radios Velcro RACE Helmet Dust Skirt\u003c\/strong\u003e helps keep sand and dirt away from the lower helmet opening in dusty offroad racing. Its lightweight material allows ventilation, and the supplied adhesive Velcro strip supports installation and removal.\u003c\/p\u003e\u003ch2\u003eProduct specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSFI 3.3\/5 approved\u003c\/li\u003e\n\u003cli\u003eLightweight, fire-retardant material\u003c\/li\u003e\n\u003cli\u003eAdhesive Velcro attachment strip included\u003c\/li\u003e\n\u003cli\u003eHelmet accessory, not a complete helmet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMatch your helmet and air connections\u003c\/h2\u003e\u003cp\u003eConfirm your exact helmet model, lower-shell profile and attachment arrangement. Do not assume universal full-face or pumper-helmet compatibility. Check clearance around side air inlets, communications wiring and your suit collar in your seated driving position.\u003c\/p\u003e\u003cp\u003eFollow the manufacturer's installation instructions. Keep air and communications connections accessible, and ensure the skirt does not restrict required head movement or interfere with your head-and-neck restraint. Check the physical SFI label against current category and event requirements.\u003c\/p\u003e\u003ch2\u003eSupport from Harris Race Radios™\u003c\/h2\u003e\u003cp\u003eHarris Race Radios™ is the Exclusive Official Authorised Distributor and Dealer for Rugged Radios in Australasia. Our radio and race-engineering team can advise on helmet-system matching, communications installation and equipment repairs.\u003c\/p\u003e\u003cp\u003eContact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your helmet model and air-inlet layout.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs a Velcro strip included?\u003c\/h3\u003e\u003cp\u003eYes. This skirt includes an adhesive Velcro strip for attachment.\u003c\/p\u003e\u003ch3\u003eWill it fit every full-face helmet?\u003c\/h3\u003e\u003cp\u003eConfirm your exact model, lower-shell profile and attachment arrangement before ordering. Check air-inlet and wiring clearance rather than assuming universal fitment.\u003c\/p\u003e\u003ch3\u003eWhat is its SFI specification?\u003c\/h3\u003e\u003cp\u003eThe Rugged Radios Velcro RACE Helmet Dust Skirt is SFI 3.3\/5 approved.\u003c\/p\u003e\u003cp\u003eCompare options in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. For attachment repairs, see the replacement Velcro strip, sold separately as an attachment accessory. Explore \u003ca href=\"\/collections\/maglock-helmet-air-coupling\"\u003ehelmet cooling and forced-air components\u003c\/a\u003e for your air-system setup.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is a Velcro strip included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. This skirt includes an adhesive Velcro strip for attachment.\"}},{\"@type\":\"Question\",\"name\":\"Will it fit every full-face helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Confirm your exact model, lower-shell profile and attachment arrangement before ordering. Check air-inlet and wiring clearance rather than assuming universal fitment.\"}},{\"@type\":\"Question\",\"name\":\"What is its SFI specification?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The Rugged Radios Velcro RACE Helmet Dust Skirt is SFI 3.3\/5 approved.\"}}]}\u003c\/script\u003e","brand":"Rugged Radios","offers":[{"title":"Default Title","offer_id":45434236141787,"sku":"RUGGED-SKIRT-BLK","price":102.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/rugged-radios-rugged-radios-velcro-race-helmet-dust-skirt-649311.jpg?v=1714059662"},{"product_id":"roux-rugged-velcro-race-helmet-dust-skirt","title":"Roux Rugged Velcro Offroad Helmet Dust Skirt","description":"\u003cp\u003eThe \u003cstrong\u003eRoux Rugged Velcro Offroad Helmet Dust Skirt\u003c\/strong\u003e helps keep sand and dirt away from the lower helmet opening while allowing ventilation. An adhesive Velcro strip is included for installation and removal.\u003c\/p\u003e\u003ch2\u003eProduct specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSFI 3.3\/5 approved\u003c\/li\u003e\n\u003cli\u003eLightweight, fire-retardant material\u003c\/li\u003e\n\u003cli\u003eAdhesive Velcro strip included\u003c\/li\u003e\n\u003cli\u003eHelmet not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMatch your Roux helmet setup\u003c\/h2\u003e\u003cp\u003eConfirm your exact helmet model, lower-shell profile and attachment arrangement. Do not assume every pumper or forced-air helmet uses the same skirt. Check clearance around top or side air connections and communications wiring in your seated driving position.\u003c\/p\u003e\u003cp\u003eFollow the manufacturer's installation instructions and check the skirt with your race-suit collar and head-and-neck restraint. Keep connections accessible and ensure required movement is not restricted. Compare the physical SFI label with current category and event requirements.\u003c\/p\u003e\u003ch2\u003ePractical equipment advice\u003c\/h2\u003e\u003cp\u003eHarris Race Radios™ can help match your helmet, skirt, communications and air connections. Contact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your exact helmet model and racing application.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs a helmet included?\u003c\/h3\u003e\u003cp\u003eNo. This listing is for the dust skirt accessory.\u003c\/p\u003e\u003ch3\u003eIs an attachment strip included?\u003c\/h3\u003e\u003cp\u003eYes. An adhesive Velcro strip is included.\u003c\/p\u003e\u003ch3\u003eWhat is its SFI specification?\u003c\/h3\u003e\u003cp\u003eThe Roux Rugged Velcro Offroad Helmet Dust Skirt is SFI 3.3\/5 approved.\u003c\/p\u003e\u003ch3\u003eWill it fit every forced-air helmet?\u003c\/h3\u003e\u003cp\u003eConfirm the exact helmet model, attachment arrangement and air-inlet clearance before ordering.\u003c\/p\u003e\u003cp\u003eCompare alternatives in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. Browse \u003ca href=\"\/collections\/maglock-helmet-air-coupling\"\u003ehelmet cooling and forced-air components\u003c\/a\u003e and \u003ca href=\"\/collections\/all-helmet-accessories\"\u003eAll Helmet Accessories\u003c\/a\u003e for related parts.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is a helmet included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. This listing is for the dust skirt accessory.\"}},{\"@type\":\"Question\",\"name\":\"Is an attachment strip included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. An adhesive Velcro strip is included.\"}},{\"@type\":\"Question\",\"name\":\"What is its SFI specification?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The Roux Rugged Velcro Offroad Helmet Dust Skirt is SFI 3.3\/5 approved.\"}},{\"@type\":\"Question\",\"name\":\"Will it fit every forced-air helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Confirm the exact helmet model, attachment arrangement and air-inlet clearance before ordering.\"}}]}\u003c\/script\u003e","brand":"Roux Helmets USA","offers":[{"title":"Default Title","offer_id":45437146661083,"sku":"","price":98.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/Roux-Helmet-Skirt..png?v=1714092222"},{"product_id":"impact-velcro-race-helmet-dust-skirt","title":"Impact Velcro RACE Helmet Dust Skirt","description":"\u003cp\u003eThe \u003cstrong\u003eImpact Velcro RACE Helmet Dust Skirt\u003c\/strong\u003e adds coverage below the helmet to help minimise dirt and debris entering around the neck and suit collar. Its soft knit Nomex construction uses two layers, with a tapered shape intended to tuck into the driving suit.\u003c\/p\u003e\u003ch2\u003eConstruction and attachment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo-layer soft knit Nomex construction\u003c\/li\u003e\n\u003cli\u003eVelcro attachment\u003c\/li\u003e\n\u003cli\u003eSFI 3.3\/10 approved\u003c\/li\u003e\n\u003cli\u003eTapered shape for coverage at the helmet-to-suit junction\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eHelmet not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck your exact helmet fitment\u003c\/h2\u003e\u003cp\u003eConfirm the lower-shell shape, attachment arrangement and selected skirt size against your exact helmet model before ordering. A helmet brand name alone does not establish compatibility.\u003c\/p\u003e\u003cp\u003eFollow the manufacturer's installation instructions. Check the skirt in your seated driving position with your suit collar, communications wiring, air hose and head-and-neck restraint. Keep connections accessible and ensure required movement is not restricted.\u003c\/p\u003e\u003ch2\u003eSFI specification and racing requirements\u003c\/h2\u003e\u003cp\u003eThis Impact skirt is SFI 3.3\/10 approved. Check its physical label alongside the current requirements for your NZ or Australian discipline, category and event.\u003c\/p\u003e\u003cp\u003eA dust skirt does not replace a balaclava, helmet, race suit or head-and-neck restraint.\u003c\/p\u003e\u003ch2\u003eCompare helmet skirts\u003c\/h2\u003e\u003cp\u003eCompare the \u003ca href=\"\/products\/pci-racing-2-layer-nomex-helmet-skirt\"\u003ePCI Racing 2-Layer Nomex Helmet Skirt\u003c\/a\u003e using its own fitment and construction information. Browse our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e for other skirts and replacement attachment accessories, or \u003ca href=\"\/collections\/all-helmet-accessories\"\u003eAll Helmet Accessories\u003c\/a\u003e for related parts.\u003c\/p\u003e\u003cp\u003eHarris Race Radios™ can help match the accessory to your helmet and communications setup. Contact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your helmet model, selected skirt option and racing application.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs a helmet included?\u003c\/h3\u003e\u003cp\u003eNo. This listing is for the Impact helmet dust skirt accessory.\u003c\/p\u003e\u003ch3\u003eWill it fit every full-face helmet?\u003c\/h3\u003e\u003cp\u003eCheck your exact helmet model, attachment arrangement and selected skirt size before ordering.\u003c\/p\u003e\u003ch3\u003eWhich SFI rating applies?\u003c\/h3\u003e\u003cp\u003eThe Impact helmet dust skirt is SFI 3.3\/10 approved. Compare its physical label with your category and event requirements.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is a helmet included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. This listing is for the Impact helmet dust skirt accessory.\"}},{\"@type\":\"Question\",\"name\":\"Will it fit every full-face helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Check your exact helmet model, attachment arrangement and selected skirt size before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Which SFI rating applies?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The Impact helmet dust skirt is SFI 3.3\/10 approved. Compare its physical label with your category and event requirements.\"}}]}\u003c\/script\u003e","brand":"Impact","offers":[{"title":"Small\/ Medium","offer_id":47666220957915,"sku":"IMPACT-SKIRT-1","price":199.0,"currency_code":"NZD","in_stock":true},{"title":"Large\/ XL","offer_id":47666220990683,"sku":"IMPACT-SKIRT-LG","price":199.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/skirt.webp?v=1718423993"},{"product_id":"stilo-sfi-venti-wrx-skirt","title":"Stilo SFI Venti WRX Skirt","description":"\u003cp\u003eThe \u003cstrong\u003eStilo SFI Venti WRX Skirt\u003c\/strong\u003e adds coverage below the helmet to help keep dust and dirt away from your neck and back in dusty racing conditions. It is designed for compatible Stilo WRX Venti Dirt and Raid helmets, with SFI 3.3\/10 approval stated for this accessory.\u003c\/p\u003e\u003ch2\u003eMatch the skirt to your WRX helmet\u003c\/h2\u003e\u003cp\u003eCheck your exact helmet model and attachment arrangement before ordering. See the \u003ca href=\"\/products\/stilo-wrx-venti-raid-zero\"\u003eStilo WRX Venti Raid\u003c\/a\u003e and \u003ca href=\"\/products\/stilo-wrx-venti-dirt-carbon-helmet-copy\"\u003eStilo WRX Venti Dirt Carbon\u003c\/a\u003e helmet listings for the corresponding helmet information. This is a skirt accessory, not a complete helmet.\u003c\/p\u003e\u003cp\u003eFor an ST5 or ST6 helmet, compare the separate \u003ca href=\"\/products\/stilo-sfi-st5-st6-helmet-skirt\"\u003eStilo ST5\/ST6 skirt\u003c\/a\u003e rather than assuming the WRX skirt fits.\u003c\/p\u003e\u003ch2\u003eDust coverage and fire protection\u003c\/h2\u003e\u003cp\u003eThe skirt helps reduce dust exposure around the lower helmet, neck and back. Its fire-protection specification is separate from the helmet's certification. Check the physical SFI label and current category and event requirements for your intended use in New Zealand or Australia.\u003c\/p\u003e\u003ch2\u003eFitting your helmet system\u003c\/h2\u003e\u003cp\u003eFollow Stilo's installation instructions and check the skirt in your seated driving position with your suit collar, communications wiring, air hose and head-and-neck restraint. Keep connections accessible and check that the skirt does not restrict required movement. It does not replace your other protective equipment.\u003c\/p\u003e\u003cp\u003eHarris Race Radios™ can help match the skirt to your helmet and communications setup. Contact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your exact helmet model and racing application.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich helmets is this skirt intended for?\u003c\/h3\u003e\u003cp\u003eCompatible Stilo WRX Venti Dirt and Raid helmets. Confirm your exact model and attachment arrangement before ordering.\u003c\/p\u003e\u003ch3\u003eIs this the ST5\/ST6 skirt?\u003c\/h3\u003e\u003cp\u003eNo. The Stilo ST5\/ST6 skirt is a separate product with its own fitment information.\u003c\/p\u003e\u003ch3\u003eWhat SFI approval is stated for this skirt?\u003c\/h3\u003e\u003cp\u003eThis listing states SFI 3.3\/10 approval. Check the physical label on the supplied accessory and the current requirements for your category and event.\u003c\/p\u003e\u003cp\u003eCompare helmet-specific skirt options and replacement attachment accessories in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. Browse \u003ca href=\"\/collections\/stilo-accessories\"\u003eStilo helmet accessories\u003c\/a\u003e for other model-specific parts.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which helmets is this skirt intended for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compatible Stilo WRX Venti Dirt and Raid helmets. Confirm your exact model and attachment arrangement before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Is this the ST5\/ST6 skirt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The Stilo ST5\/ST6 skirt is a separate product with its own fitment information.\"}},{\"@type\":\"Question\",\"name\":\"What SFI approval is stated for this skirt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This listing states SFI 3.3\/10 approval. Check the physical label on the supplied accessory and the current requirements for your category and event.\"}}]}\u003c\/script\u003e","brand":"Stilo","offers":[{"title":"Default Title","offer_id":45910957261019,"sku":"SLO-YA0289","price":279.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/Stilo_WRX_Skirt.webp?v=1722287716"},{"product_id":"mrc-helmet-replacement-dust-skirt","title":"MRC Helmet Replacement Dust Skirt","description":"\u003cp\u003eThe \u003cstrong\u003eMRC Helmet Replacement Dust Skirt\u003c\/strong\u003e replaces the dust curtain on compatible MRC helmets. Its soft, breathable construction and full-length curtain help keep dirt out while supporting airflow around the lower helmet opening.\u003c\/p\u003e\u003ch2\u003eProduct specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSFI 3.3\/5 approved\u003c\/li\u003e\n\u003cli\u003eSoft, breathable construction\u003c\/li\u003e\n\u003cli\u003eFull-length dust curtain\u003c\/li\u003e\n\u003cli\u003eReplacement accessory for compatible MRC helmets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck the replacement fit\u003c\/h2\u003e\u003cp\u003eConfirm your exact MRC helmet model and attachment arrangement before ordering. This is not a universal replacement for unrelated helmet brands. Follow the manufacturer's fitting instructions and check clearance around air connections, communications wiring, suit collar and head-and-neck restraint in your seated driving position.\u003c\/p\u003e\u003cp\u003eCheck the physical SFI label against current category and event requirements. A replacement dust skirt does not replace your helmet, balaclava, racewear or restraint equipment.\u003c\/p\u003e\u003ch2\u003eRugged Radios support\u003c\/h2\u003e\u003cp\u003eHarris Race Radios™ is the Exclusive Official Authorised Distributor and Dealer for Rugged Radios in Australasia. Our radio and race-engineering team can advise on helmet-system matching, communications installation and repairs.\u003c\/p\u003e\u003cp\u003eContact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your MRC helmet model and replacement requirements.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is this replacement skirt for?\u003c\/h3\u003e\u003cp\u003eIt replaces the dust curtain on compatible MRC helmets. Confirm your exact model and attachment arrangement.\u003c\/p\u003e\u003ch3\u003eIs it a complete helmet?\u003c\/h3\u003e\u003cp\u003eNo. This is a replacement dust-skirt accessory.\u003c\/p\u003e\u003ch3\u003eWhat is its SFI specification?\u003c\/h3\u003e\u003cp\u003eThe MRC Helmet Replacement Dust Skirt is SFI 3.3\/5 approved.\u003c\/p\u003e\u003cp\u003eCompare skirts and attachment accessories in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. Browse \u003ca href=\"\/collections\/all-helmet-accessories\"\u003eAll Helmet Accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/maglock-helmet-air-coupling\"\u003ehelmet cooling and forced-air components\u003c\/a\u003e for related parts.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is this replacement skirt for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It replaces the dust curtain on compatible MRC helmets. Confirm your exact model and attachment arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Is it a complete helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. This is a replacement dust-skirt accessory.\"}},{\"@type\":\"Question\",\"name\":\"What is its SFI specification?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The MRC Helmet Replacement Dust Skirt is SFI 3.3\/5 approved.\"}}]}\u003c\/script\u003e","brand":"Rugged Radios","offers":[{"title":"Default Title","offer_id":46047458296027,"sku":"MRC-DUSTSKIRT","price":99.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/rugged-radios-mrc-helmet-replacement-dust-skirt1.webp?v=1726381307"},{"product_id":"stilo-sfi-st5-st6-helmet-skirt","title":"Stilo SFI ST5 ST6 Helmet Skirt","description":"\u003cp\u003e\u003cstrong\u003eSFI specification: SFI 3.3\/10 approved Stilo ST5\/ST6 helmet skirt.\u003c\/strong\u003e Match the exact helmet fitment and check current category and event requirements.\u003c\/p\u003e\u003cp\u003eThe genuine \u003cstrong\u003eStilo SFI Helmet Skirt for ST5 and ST6 Helmets\u003c\/strong\u003e is a fire-resistant accessory that attaches around the base of compatible Stilo ST5 and ST6 helmets, providing additional coverage at the lower helmet and neck area.\u003c\/p\u003e\u003ch2\u003eChoose the correct Stilo skirt\u003c\/h2\u003e\u003cp\u003eThis listing is for the ST5\/ST6 skirt. The \u003ca href=\"\/products\/stilo-sfi-venti-wrx-skirt\"\u003eStilo SFI Venti WRX skirt\u003c\/a\u003e is a separate product for the WRX application. Do not use the WRX listing's fitment information to select this ST5\/ST6 accessory. Confirm your exact helmet model, shell configuration and attachment method before ordering.\u003c\/p\u003e\u003ch2\u003eFitment and fire-protection specification\u003c\/h2\u003e\u003cp\u003eCheck the SFI label and specification on the exact skirt alongside the current requirements for your discipline, category and event. Do not assume that every Stilo skirt has the same rating or that an accessory establishes eligibility for the complete helmet setup.\u003c\/p\u003e\u003cp\u003eFollow Stilo's fitting instructions. Check the skirt with your suit collar, communications wiring, air connections and any head-and-neck restraint in your driving position. It must not restrict required head movement or access to connections. A skirt does not replace a balaclava, race suit, helmet or head-and-neck restraint.\u003c\/p\u003e\u003ch2\u003ePractical motorsport advice\u003c\/h2\u003e\u003cp\u003eHarris Race Radios™ supplies genuine Stilo accessories and helps match parts to the driver's helmet and application. Aaron Harris brings active racing and professional race-engineering experience, including Porsche Carrera Cup and endurance racing, to practical equipment selection. Rex Harris's motorsport radio experience dates from 1975 and supports communications integration and installation advice.\u003c\/p\u003e\u003cp\u003eFor model-matching help, contact Aaron at \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e with your exact helmet model and application.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need a helmet skirt for my racing category?\u003c\/h3\u003e\u003cp\u003eHelmet skirt requirements vary by category and event. Check the current rules and the exact product label before racing. Our team can help you identify the product information to compare with those requirements.\u003c\/p\u003e\u003ch3\u003eIs this a genuine Stilo part?\u003c\/h3\u003e\u003cp\u003eYes. Harris Race Radios™ supplies genuine Stilo accessories. Confirm the exact model fit and current availability on this listing.\u003c\/p\u003e\u003ch3\u003eIs this the same as the Venti WRX skirt?\u003c\/h3\u003e\u003cp\u003eNo. This listing is for the ST5\/ST6 skirt. The Stilo SFI Venti WRX skirt has its own separate listing and fitment information.\u003c\/p\u003e\u003cp\u003eCompare helmet-specific skirt options and replacement attachment accessories in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. For other model-specific parts, browse \u003ca href=\"\/collections\/stilo-accessories\"\u003eStilo helmet accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need a helmet skirt for my racing category?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Helmet skirt requirements vary by category and event. Check the current rules and the exact product label before racing. Our team can help you identify the product information to compare with those requirements.\"}},{\"@type\":\"Question\",\"name\":\"Is this a genuine Stilo part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Harris Race Radios™ supplies genuine Stilo accessories. Confirm the exact model fit and current availability on this listing.\"}},{\"@type\":\"Question\",\"name\":\"Is this the same as the Venti WRX skirt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. This listing is for the ST5\/ST6 skirt. The Stilo SFI Venti WRX skirt has its own separate listing and fitment information.\"}}]}\u003c\/script\u003e","brand":"Stilo","offers":[{"title":"Default Title","offer_id":47264761807067,"sku":"SLO-YA0830","price":275.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/StiloST6skirt.webp?v=1752817800"},{"product_id":"pci-racing-2-layer-nomex-helmet-skirt","title":"PCI Racing 2-Layer Nomex Helmet Skirt","description":"\u003cp\u003e\u003cstrong\u003eSFI specification: SFI 3.3\/5 approved helmet skirt.\u003c\/strong\u003e Match the exact helmet fitment and check current category and event requirements.\u003c\/p\u003e\n\u003cp\u003eThe PCI Racing 2-Layer Nomex Helmet Skirt is a motorsport fire-protection accessory designed to sit around the lower helmet and neck area, helping cover the gap between a compatible helmet and racing suit collar. It is intended for competitors who need to check helmet, racewear and event requirements as one complete safety setup.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e PCI Race Radios\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction described by the product:\u003c\/strong\u003e 2-layer Nomex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Motorsport helmet accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 4638\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary use:\u003c\/strong\u003e Neck-area fire-protection coverage between helmet and racewear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy use a helmet skirt?\u003c\/h2\u003e\n\u003cp\u003eA helmet skirt can help close the exposed gap around the lower helmet and suit collar. That makes correct fitment important: the skirt, helmet, racewear, seat position and any head-and-neck restraint should be considered together. A helmet skirt is an accessory, not a replacement for a compliant helmet, approved racewear or a certified FHR system.\u003c\/p\u003e\n\u003ch2\u003eFitment and event requirements\u003c\/h2\u003e\n\u003cp\u003eFitment depends on the helmet model, racewear collar, driver position and the requirements of the relevant event or governing body. The available listing information does not confirm universal helmet compatibility, FIA homologation or approval for every class. Confirm the current requirements with the manufacturer, event organiser or scrutineer before racing.\u003c\/p\u003e\n\u003cp\u003eDo not assume that a helmet skirt is compatible with every helmet, HANS device, hybrid restraint or race suit. If you are unsure, send Harris Race Radios™ the helmet model and racewear details before ordering.\u003c\/p\u003e\n\u003ch2\u003eHelmet and communications advice\u003c\/h2\u003e\n\u003cp\u003eThe helmet is the critical part of a motorsport communications and safety setup. For broader helmet selection, communications integration and fitment guidance, read the \u003ca href=\"\/pages\/helmet-knowledge-centre\"\u003eHelmet Knowledge Centre\u003c\/a\u003e. To compare another construction and specification, see the \u003ca href=\"\/products\/impact-velcro-race-helmet-dust-skirt\"\u003eImpact Velcro RACE Helmet Dust Skirt\u003c\/a\u003e, which is SFI 3.3\/10 approved. Select by exact helmet compatibility, attachment system and your category requirements, not the product name alone.\u003c\/p\u003e\n\u003ch2\u003eWhy buy from Harris Race Radios™?\u003c\/h2\u003e\n\u003cp\u003eHarris Race Radios™ is the exclusive NZ dealer and distributor for PCI Race Radios, supplying motorsport communications and safety equipment across New Zealand and Australia. Rex Harris is a qualified Radio Telecommunications Engineer, \u003ca href=\"\/pages\/rex-harris-radio-credentials\"\u003eRSM Approved Radio Engineer (ARE127) and Approved Radio Certifier (ARC127)\u003c\/a\u003e requirements, with motorsport radio experience dating from 1975. Aaron Harris is an active racing driver, professional race engineer and MotorSport NZ Licence Examiner for licences. His Porsche Carrera Cup and endurance-racing engineering experience supports practical equipment selection and helmet-system integration.\u003c\/p\u003e\n\u003cp\u003eNZ stock is held locally where available, and shipping to Australia is available. Contact us if you need help checking the complete helmet, racewear and event setup before ordering.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PCI Racing 2-Layer Nomex Helmet Skirt used for?\u003c\/h3\u003e\n\u003cp\u003eIt is a motorsport accessory designed to sit around the lower helmet and neck area, helping cover the gap between a compatible helmet and racing suit collar.\u003c\/p\u003e\n\u003ch3\u003eWhat does 2-layer Nomex mean?\u003c\/h3\u003e\n\u003cp\u003eThe product is identified as a 2-layer Nomex helmet skirt. Confirm the exact construction, homologation and event eligibility with the manufacturer or your scrutineer if those details affect your class requirements.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my helmet?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on the helmet model, racewear collar and driver setup. The available information does not confirm universal fitment, so contact Harris Race Radios with your helmet and racewear details before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs the PCI helmet skirt FIA approved?\u003c\/h3\u003e\n\u003cp\u003eFIA homologation is not confirmed by the available product information. Check the product labelling and current requirements for your event, class and governing body before relying on it for competition.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with a HANS or other FHR device?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the complete helmet, racewear, harness, seat and FHR installation. A helmet skirt does not certify or approve an FHR combination. Confirm the complete setup before racing.\u003c\/p\u003e\n\u003ch3\u003eDo you ship to Australia?\u003c\/h3\u003e\n\u003cp\u003eHarris Race Radios ships motorsport equipment to Australia. Contact us if you need help confirming fitment or shipping options for your helmet and racewear setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCompare helmet-specific skirt options and replacement attachment accessories in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. Select by your exact helmet model, attachment system and the specification of the individual product.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the PCI Racing 2-Layer Nomex Helmet Skirt used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a motorsport accessory designed to sit around the lower helmet and neck area, helping cover the gap between a compatible helmet and racing suit collar.\"}},{\"@type\":\"Question\",\"name\":\"What does 2-layer Nomex mean?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The product is identified as a 2-layer Nomex helmet skirt. Confirm the exact construction, homologation and event eligibility with the manufacturer or your scrutineer if those details affect your class requirements.\"}},{\"@type\":\"Question\",\"name\":\"Will it fit my helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Fitment depends on the helmet model, racewear collar and driver setup. The available information does not confirm universal fitment, so contact Harris Race Radios with your helmet and racewear details before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Is the PCI helmet skirt FIA approved?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"FIA homologation is not confirmed by the available product information. Check the product labelling and current requirements for your event, class and governing body before relying on it for competition.\"}},{\"@type\":\"Question\",\"name\":\"Can I use it with a HANS or other FHR device?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compatibility depends on the complete helmet, racewear, harness, seat and FHR installation. A helmet skirt does not certify or approve an FHR combination. Confirm the complete setup before racing.\"}},{\"@type\":\"Question\",\"name\":\"Do you ship to Australia?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Harris Race Radios ships motorsport equipment to Australia. Contact us if you need help confirming fitment or shipping options for your helmet and racewear setup.\"}}]}\u003c\/script\u003e","brand":"PCI Race Radios","offers":[{"title":"Default Title","offer_id":49070760788187,"sku":"4638","price":187.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/PCI_Racing_2_Layer_Helmet_Skirt_4.webp?v=1785993383"},{"product_id":"pci-racing-helmet-skirt","title":"PCI Racing Helmet Skirt","description":"\u003cp\u003e\u003cstrong\u003eSFI specification: SFI 3.3\/5 approved helmet skirt.\u003c\/strong\u003e Match the exact helmet fitment and check current category and event requirements.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003ePCI Racing Helmet Skirt\u003c\/strong\u003e adds coverage at the junction between the lower helmet and race-suit collar, helping reduce exposure to dirt and debris in motorsport use. Choose it to suit your exact helmet and driving setup rather than assuming a universal fit.\u003c\/p\u003e\u003ch2\u003eConfirm your helmet fitment\u003c\/h2\u003e\u003cp\u003eCheck the helmet's lower-shell shape, skirt attachment arrangement and clearance around your suit collar before ordering. Fit the skirt according to the manufacturer's instructions, then check it in your seated driving position with communications wiring, air connections and any head-and-neck restraint. Keep connections accessible and ensure required head movement is not restricted.\u003c\/p\u003e\u003ch2\u003eCompare PCI skirt options\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"\/products\/pci-racing-2-layer-nomex-helmet-skirt\"\u003ePCI Racing 2-Layer Nomex Helmet Skirt\u003c\/a\u003e is a separate listing. Compare its stated construction and certification with this product's exact specification rather than transferring fire-protection claims between the two. You can also compare the \u003ca href=\"\/products\/impact-velcro-race-helmet-dust-skirt\"\u003eImpact Velcro RACE Helmet Dust Skirt\u003c\/a\u003e, checking its own fitment and supplied components.\u003c\/p\u003e\u003cp\u003eDust coverage is not a substitute for a specified fire-protection rating. Where your category requires a certified skirt, check the physical label on the exact item and the current event requirements. A skirt does not replace a balaclava, helmet, race suit or head-and-neck restraint.\u003c\/p\u003e\u003ch2\u003eWhy Harris Race Radios™?\u003c\/h2\u003e\u003cp\u003eHarris Race Radios™ is the exclusive NZ dealer and distributor for PCI Race Radios. Our practical advice combines motorsport communications experience with active racing and professional race engineering. Rex Harris's motorsport radio experience dates from 1975. Aaron Harris brings Porsche Carrera Cup and endurance-racing engineering experience, alongside his own racing achievements, to equipment selection and helmet-system integration.\u003c\/p\u003e\u003cp\u003eAaron is also a MotorSport NZ Licence Examiner for licences. For help matching this accessory to your helmet, contact \u003ca href=\"mailto:aaron@harriscomms.co.nz\"\u003eaaron@harriscomms.co.nz\u003c\/a\u003e or \u003ca href=\"tel:+64274499654\"\u003e+64 27 449 9654\u003c\/a\u003e. Ask about current availability and Australian shipping options when ordering.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat does a helmet skirt do?\u003c\/h3\u003e\u003cp\u003eA helmet skirt adds coverage around the lower helmet and suit collar to help reduce exposure to dirt and debris. Its performance depends on its construction and how it fits your helmet setup.\u003c\/p\u003e\u003ch3\u003eIs this the same as the 2-Layer Nomex Helmet Skirt?\u003c\/h3\u003e\u003cp\u003eNo. The PCI Racing 2-Layer Nomex Helmet Skirt is a separate product. Compare the exact materials and stated certification on each listing before selecting one.\u003c\/p\u003e\u003ch3\u003eWill this fit my helmet?\u003c\/h3\u003e\u003cp\u003eConfirm your exact helmet model and attachment arrangement before ordering. Contact Aaron with your helmet details if compatibility is unclear.\u003c\/p\u003e\u003ch3\u003eCan I order from Australia?\u003c\/h3\u003e\u003cp\u003eContact Aaron for current Australian shipping options and availability.\u003c\/p\u003e\u003cp\u003eCompare helmet-specific skirt options and replacement attachment accessories in our \u003ca href=\"\/collections\/helmet-dirt-dust-skirts\"\u003eHelmet Dirt \u0026amp; Dust Skirts collection\u003c\/a\u003e. Browse \u003ca href=\"\/collections\/all-helmet-accessories\"\u003eAll Helmet Accessories\u003c\/a\u003e for other parts to match your setup.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What does a helmet skirt do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A helmet skirt adds coverage around the lower helmet and suit collar to help reduce exposure to dirt and debris. Its performance depends on its construction and how it fits your helmet setup.\"}},{\"@type\":\"Question\",\"name\":\"Is this the same as the 2-Layer Nomex Helmet Skirt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The PCI Racing 2-Layer Nomex Helmet Skirt is a separate product. Compare the exact materials and stated certification on each listing before selecting one.\"}},{\"@type\":\"Question\",\"name\":\"Will this fit my helmet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Confirm your exact helmet model and attachment arrangement before ordering. Contact Aaron with your helmet details if compatibility is unclear.\"}},{\"@type\":\"Question\",\"name\":\"Can I order from Australia?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Contact Aaron for current Australian shipping options and availability.\"}}]}\u003c\/script\u003e","brand":"PCI Race Radios","offers":[{"title":"Default Title","offer_id":49071800385755,"sku":"PCI-HELMET-SKIRT","price":99.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/files\/PCIProduct_HELMETSKIRT_1.jpg?v=1791343197"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/6670\/1531\/collections\/Stilo_WRX_Skirt.webp?v=1791343718","url":"https:\/\/harrisraceradios.com\/collections\/helmet-dirt-dust-skirts.oembed","provider":"Harris Race Radios","version":"1.0","type":"link"}